Kiri

Dear Sabina,

 

Thank you for your inquiry.

 

Here are the answers to your questions:

 

• Where do we have the company as manufacturer, including PRRC?

 

If the plan is to place devices on the EU market under your new Estonian company name, you will need to establish an Estonian company, as Kristi has previously guided you. There are no country-specific rules or requirements for appointing a PRRC. General PRRC principles apply as seen in the MDCG 2019-7.

 

• Do you need a certificate / proof of training for PRRC?

 

Please see the aforementioned MDCG guidance – these principles apply.

 

• Where do we have to register the medical devices? Eudamed is still not fully working.

 

Until EUDAMED is not fully functional, the placing on the market for class I devices goes through the national Medical Devices and Appliances Database, as stated in the Medical Device Act § 41²:

Implementation of obligations and requirements related with European database on medical devices

 Until the implementation date of the obligations set out in points d and e of subsection 3 of Article 122 of Regulation (EU) 2017/745 and in points a and f of subsection 3 of Article 113 of Regulation (EU) 2017/746 of the European Parliament and of the Council related with the European database on medical devices, the exchange of information with the Health Board and the transmission of data to the Health Board takes place according to the wording of the Medical Devices Act in force prior to entry into force of this wording.

 

The previous wording of the act can be found here, and the relevant paragraph is § 26 (1):

Any person who places a class I medical device, custom-made medical device, system of medical devices, procedure pack or in vitro diagnostic medical device on the market in Estonia, shall notify, at least ten days before the medical device is placed on the market, the Health Board of the intention to place the medical device on the market and of any significant alterations of the medical device.

 

• In which language do you need the technical documentation? Is English ok or do you need it in Estonian?

 

English is accepted as the language for technical documentation.

 

Please do not hesitate to contact me for further information or any questions.

 

Best regards,

 

Karl Kalev Türk

Chief Specialist

Department of Medical Devices

Phone +372 5648 5663

karl.kalev.turk@terviseamet.ee | mso@terviseamet.ee 

 

Republic of Estonia Terviseamet | Health Board +372 794 3500 info@terviseamet.ee www.terviseamet.ee Paldiski mnt 81, 10614 Tallinn Estonia

This e-mail is confidential and meant for use by the person named in the letterhead. Any use in any way or copying of it by a person not marked as the addressee thereof is prohibited. If you have got this e-mail by mistake, please notify of it the sender without delay and delete the received e-mail together with all its attachments.

 

Saatja: 1M4 UG - QM <qm@1m4.de>
Saatmisaeg: laupäev, 16. detsember 2023 12:53
Adressaat: Karl Kalev Türk <karl.kalev.turk@terviseamet.ee>
Teema: Fwd: New request for e-consulting

 

Tähelepanu! Tegemist on väljastpoolt asutust saabunud kirjaga. Tundmatu saatja korral palume linke ja faile mitte avada.

 

Hello Karl!

 

I got your contact details from Kirsti (see below).

 

We - 1M4 UG - are a small company and sell/produce some medical and non-medical products. These are produced mostly in China and Pakistan, but we are the manufacturer of the medical devices. They are class I, so no notified body is needed.

 

We think about moving the company to Estonia. Could you please give me some advice like:

 

Where do we have the company as manufacturer, including PRRC?

Do you need a certificate / proof of training for PRRC?

Where do we have to register the medical devices? Eudamed is still not fully working.

In which language do you need the technical documentation? Is English ok or do you need it in Estonian?

 

Any advice you can give me according to MDR and this topic would be helpful for our decision.

 

Thank you very much!

 

Best regards

Sabina

 

1M4 UG (haftungsbeschränkt)
Strandweg 16 
17213 Untergöhren - Deutschland
info@1m4.de - www.1m4.de 

Steuer-Nr..: 075/108/94923 
USt-IdNr.: DE323762513 
Handelsregister HRB 20890 
Amtsgericht Neubrandenburg 
Sitz der Gesellschaft: Untergöhren 
Geschäftsführer: Roland Ortloff

 

 

------- Weitergeleitete Nachricht ------
Von: Kirsti Priivits <Kirsti.Priivits@eas.ee>
Datum: Fr. 24. Nov. 2023 um 13:11
Betreff: New request for e-consulting
An: 1M4 UG - QM <qm@1m4.de>

 

Hallo Sabina,

 

Danke für Deine E-Mail und ich habe gleich verstanden, dass ein Termin noch in dieser Woche zu finden, schwierig sein wird.

Ich bin nächster Woche unterwegs  - erst in Österreich und dann in Finland. Ich schlage vor, dass wir unser Intro in Dezember machen.

 

Doch kann ich gerne gleich einige Informationen teilen (auf Englisch, ich hoffe, dass es auch so passt):

 

First I am covering the topic of steps to take for establishing a company:

Holders of an Estonian ID card or e-Residency card and a growing number of EU member states’ ID cards can establish a Private Limited Company fully online. If an ID or e-Residency card is not available, a visit to a notary in Estonia is needed to verify the foundation documents.
Establishing a private limited company – as easy as ABC:

1. Choose a name for your business and check that it is available. To check the availability, use the free tool on the website of the e-Business Register.

2. If the management board of your Estonian company is located abroad, you will need a designated contact person in Estonia, as required by the Commercial Code. This service can be obtained from a virtual office service provider. Only a notary, notary’s office, advocate, law office, sworn auditor, audit firm or licensed trust and company service provider may be designated as your contact person. A reliable source for finding business service providers is the e-Residency Marketplace, where only companies with the necessary operating license are added. If one of the management board members, a partner, a shareholder or a procurator of your company resides in Estonia, this person may also be designated as a contact person.

3. Register the company online at the e-Business Register. You can pay the state fee (in most cases 265 €) and share capital (from 0.01 € per shareholder) when you submit your application.

4. Receive confirmation. Your submitted application will be reviewed in up to one working day and any notifications will be sent by e-mail.

5. If / when your company has employees, register the employees in the employment register on the website of the Tax and Customs Board.

6. If the area of activity is subject to special requirements, a license has to be acquired. Information on the areas of activity and electronic registration on the website of the Register of Economic Activities.

7. If needed, register the company as a VAT payer on the website of Tax and Customs Board.

Though the process is fairly simple, specialized service providers (private companies) can help you through the steps. If using e-Residency, read suggestions how to choose a service provider and what services they can help you with.

 

I contacted Terviseamet (Estonian Health Board) and recieved advice to forward You directy to them. Please contact Karl Kalev Türk karl.kalev.turk@terviseamet.ee to arrage a meeting.

Some information in english can be found here: Contacts: Medical Devices | Government installation profile (terviseamet.ee). There is a Medical Device Act in English available.

 

If You have any other questions, please let me know and let’s arrange intro in December.

 

 

Best regards,

 

Kirsti Priivits

Deputy Head of Global Business Development

Invest Estonia

Enterprise Estonia

 

+372 501 2063

kirsti.priivits@eas.ee

Sepise 7, 11415 Tallinn

 

Building a successful Estonia!

 

 

Facebook: EAS – Enterprise Estonia

LinkedIn: EAS – Enterprise Estonia

 

From: 1M4 UG - QM <qm@1m4.de>
Sent: Tuesday, November 21, 2023 5:25 PM
To: Kirsti Priivits <Kirsti.Priivits@eas.ee>
Subject: Re: New request for e-consulting

 

Hallo Kirsti,

Danke für deine schnelle Rückmeldung. Morgen und übermorgen passt es bei mir leider nicht.

Aber ich melde mich, sobald ich etwas Puffer habe!

 

Gibt es denn allgemeine Infos, die ich vorab erhalten kann?

Vielen Dank!

 

Herzliche Grüße

 

Sabina

 

1M4 UG (haftungsbeschränkt)
Strandweg 16
17213 Untergöhren - Deutschland
info@1m4.de - www.1m4.de

Steuer-Nr..: 075/108/94923
USt-IdNr.: DE323762513
Handelsregister HRB 20890
Amtsgericht Neubrandenburg
Sitz der Gesellschaft: Untergöhren
Geschäftsführer: Roland Ortloff

 

 

Am Di., 21. Nov. 2023 um 15:52 Uhr schrieb Kirsti Priivits <Kirsti.Priivits@eas.ee>:

Hallo Sabina,

 

Danke für deine E-Mail und Interesse in Estland dein Unternehmen zu gründen.

Ich bin Kirsti Priivits, verantwortlich für DACH Region in unserem Team.

 

Ich würde gerne eine Intro machen, uns vorstellen und von Dein Unternehmen und von Deine Pläne hören.

 

Wie würde Dir morgen, am Mittwoch um 13.00 EET oder am Donnerstag um 10.00 EET passen?

 

 

Freundliche Grüsse,

 

Kirsti Priivits

Deputy Head of Global Business Development

Invest Estonia

Enterprise Estonia

 

+372 501 2063

kirsti.priivits@eas.ee

Sepise 7, 11415 Tallinn

 

Building a successful Estonia!

 

 

Facebook: EAS – Enterprise Estonia

LinkedIn: EAS – Enterprise Estonia

 

See elektronkiri võib sisaldada konfidentsiaalset informatsiooni. Kui antud kiri ei ole suunatud Teile, siis selle avaldamine, kopeerimine, levitamine või muul viisil kasutamine on rangelt keelatud ning võib olla ebaseaduslik. Kui saite selle kirja ekslikult, palun teavitage sellest koheselt kirja saatjat ning kustutage kiri oma süsteemidest.

---

This e-mail may contain confidential information. If you are not the intended recipient you are hereby notified that any use, disclosure, copying, distribution or taking any other action in reliance on the contents of this information is strictly prohibited and may be unlawful. If you received this e-mail in error, please contact the sender and delete the material from your systems.