| Dokumendiregister | Rahandusministeerium |
| Viit | 12.2-7/177-1 |
| Registreeritud | 16.06.2025 |
| Sünkroonitud | 17.06.2025 |
| Liik | Sissetulev kiri |
| Funktsioon | 12.2 RIIGIHANGETEALANE TEGEVUS |
| Sari | 12.2-7 Vaidlustuskomisjoni üldine kirjavahetus |
| Toimik | 12.2-7/2025 |
| Juurdepääsupiirang | Avalik |
| Adressaat | Quality Solutions Industries Private Ltd |
| Saabumis/saatmisviis | Quality Solutions Industries Private Ltd |
| Vastutaja | Pille Elismäe (Rahandusministeerium, Kantsleri vastutusvaldkond, Ühisosakond, Dokumendihaldustalitus) |
| Originaal | Ava uues aknas |
From: Quality Solutions Industries (via vako Mailing List) <[email protected]>
Sent: Fri, 13 Jun 2025 17:09:02 +0000
To: [email protected]
Cc: [email protected]; [email protected]
Subject: [vako] Enquiry about : 384251-2025 - Estonia – Calibration services – Seadmete kalibreerimisteenuse hankimine Terviseametile OJ S 112/2025 13/06/2025
Tähelepanu! Tegemist on välisvõrgust saabunud kirjaga. |
EXPERIENCE DETAILS
(Copy of completion certificates attached)
Copy of work order and work completion certificate attached for your reference.
Place: FARIDABAD Date: 01-04-2025
Sl. No
Name of Owner / Employer
Work Order / Contract /
Agreement / Purchase Order
1. United Nations – FDA Myanmar 3114975
2. United Nations – FDA Myanmar 3097465
3. GAIL INDIA LIMITED VIJAIPUR, India
GEMC- 511687755914187
4. Hero MotoCorp Ltd., GUJARAT, India
2700028283 ; 2700028227
5. Andritz Hydropower - Nepal
4503591183 ; 4503631374 ; 4503545824
6. ESIC MODEL HOSPITAL BASAIDARAPUR DELHI , India
GEMC- 511687775770517
7. Honda India Power Products Limited 23GWG0014
8. Andritz Hydropower - Nepal
4503308062
9. NHPC LIMITED, CHAMERA, CHAMBA, India
GEMC- 511687793500567
Name : SUBHASIS BOSE Designation : DIRECTOR
Value of Contract (Currency Amount)
Work Starting Date
USD 62,265.00 24/08/2022
USD 35,025.00 23/09/2019 ; 06/11/2019
INR 10,48,302.36 23/12/2022
INR 7,29,052.00 25/12/2022
INR 6,64,340.00 18/04/2022
INR 6,42,309.40 20/03/2023
INR 6,49,168.00 25/04/2023
INR 3,46,831.50 19/09/2021
INR 3,66,729.25 04/10/2023
Work Completion
Date
29/08/2022
25/09/2019 ; 07/11/2019
27/12/2022
30/12/2022
21/04/2022
25/03/2023
01/11/2023
26/09/2021
22/112024
Limit PO
Vendor
322510 Quality Solutions (India) Sector-76, BPTP Ground and First Floor, Plot No. X-4, 121006 Faridabad
Phone: Fax:
GST: 06AAAFQ1497K1Z0
General data
PO number 4503591183
Version no. 0 / 06/JUN/2022
Issue date: 01/JUN/2022
Purchaser: Tel. No.: Fax No.: E-mail:
Mr. Mukesh Nagar +917480423032 +9174804230325032 [email protected]
Total PO value with TAX: 423,620.00 INR
Delivery date: 30/JUN/2022 Valid from: 01/JUN/2022 Valid to: 30/JUN/2022
Page 1 of 3
Reference area
Servise - Measuring & lifting Tools calibration at Nepal sites
Offer reference mail date 30.05.2022 for line item 10 to 30
Item line area
Item Material Quantity Price Amount
10 1 AU
Kalanga_Tools Calibration PR created to site tools calibraiton at site.
Overall limit: 188,000.00
Total item value 188,000.00 INR / 1 AU 188,000.00
Codeword: Upper Kalanga Gad HEP (3 X 12. Project (WBS): C-90-830522-082-0109-132
Requestor: Vipin Singh
20 1 AU
MBK_Tools Calibration This PR is created for calibration services at site.
Overall limit: 85,000.00
Total item value 85,000.00 INR / 1 AU 85,000.00
Codeword: 3 x 35MW Middle Bhotekoshi - M Project (WBS): C-90-970294-058-0109-501
Registered Office Manufacturing location MANDIDEEP Manufacturing location PRITHLA ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited D-17, MPAKVN Industrial Area; MANDIDEEP, D-17, MPAKVN INDUSTRIAL AREA 49/5, MATHURA ROAD, VILLAGE District. Raisin - 462 046, Near Bhopal (M.P.), INDIA MANDIDEEP, DISTRICT. RAISEN- 462 PRITHLA, DISTRICT PALWAL Ph: +91 7480 400400, FAX: +91 7480 403393 & 400394 FAX: +91 7480 403393 & 400394 FAX: +91 1275 262055 PAN No. AABCV2466R, CIN (Corporate Identification Number):ECC No. AABCV2466RXM001 ECC No. AABCV2466RXM002 U04010MP1996PTC011430, IEC Number: 1197005293 TAN No. BPLV00336A TAN No. RTKV02346B
PO number 4503591183/0
Page 2 of 3
Item Material Quantity Price Amount
Requestor: Vipin Singh
30 1 AU
Likhu2_Tools Calibration This PR is created for the Calibration services at LIKHU2.
Overall limit: 86,000.00
Total item value 86,000.00 INR / 1 AU 86,000.00
Codeword: LIKHU 2 ( 2 x 22 MW +1 x 11 MW Project (WBS): C-90-834131-082-0109-501
Requestor: Vipin Singh
Total net item value INR 359,000.00
IN : Integrated GST 18.00 % 64,620.00
Total PO value with TAX INR 423,620.00
Terms and Conditions:
Invoice address: Andritz Hydro Private Limited D-17, MPAKVN Industrial Area Raisen 462046 Mandideep
Delivery address: Andritz Hydro Private Limited Raisen D-17, MPAKVN Industrial Area 462046 Mandideep
GST 23AABCV2466R1ZV
Terms of delivery: FCA Faridabad, according to INCOTERMS 2010.
Terms of Payment: Payable immediately Due net
European REACH Regulation
According to EU REACH Regulation No. 1907/2006 Article 33 (1), suppliers of articles (article means an object which during production is given a special shape, surface or design which determines its function to a greater degree than its chemical composition does) shall inform their customers about the presence of Substances of Very High Concern (SVHC) if more than 0.1% by weight of the article. The respective list of SVHC can be found under following link: https://echa.europa.eu/candidate-list-table.
A supplier who delivers such articles, shall provide information as per Article 33 REACH Regulation. This comprehensive information must be provided in such a way that SVHC contained can be precisely assigned to
Registered Office Manufacturing location MANDIDEEP Manufacturing location PRITHLA ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited D-17, MPAKVN Industrial Area; MANDIDEEP, D-17, MPAKVN INDUSTRIAL AREA 49/5, MATHURA ROAD, VILLAGE District. Raisin - 462 046, Near Bhopal (M.P.), INDIA MANDIDEEP, DISTRICT. RAISEN- 462 PRITHLA, DISTRICT PALWAL Ph: +91 7480 400400, FAX: +91 7480 403393 & 400394 FAX: +91 7480 403393 & 400394 FAX: +91 1275 262055 PAN No. AABCV2466R, CIN (Corporate Identification Number):ECC No. AABCV2466RXM001 ECC No. AABCV2466RXM002 U04010MP1996PTC011430, IEC Number: 1197005293 TAN No. BPLV00336A TAN No. RTKV02346B
Limit PO Vendor
322510 Quality Solutions (India) Sector-76, BPTP Ground and First Floor, Plot No. X-4, 121006 Faridabad
Phone: Fax:
GST: 06AAAFQ1497K1Z0
General data
PO number 4503631374
Version no. 0 / 12/JUL/2022 Issue date: 12/JUL/2022
Purchaser: Tel. No.: Fax No.: E-mail:
Mr. Neeraj Kumar +911275288662 +911275262055 [email protected]
Total PO value with TAX: 34,220.00 INR
Delivery date: 30/APR/2022 Valid from: 12/JUL/2022 Valid to: 30/JUL/2022
Page 1 of 3
Reference area
Item line area
Item Material Quantity Price Amount 10 1 AU
Likhu HM_Tools Calibration This PR is created for the calibration services at LIKHU HM site.
Overall limit: 29,000.00
Total item value 29,000.00 INR / 1 AU 29,000.00
Codeword: Likhu A,Likhu 1,Likhu 2 - Serv Project (WBS): C-90-835396-058-0109-501
Requestor: Vipin Singh
Total net item value INR 29,000.00
IN : Central GST 9.00 % 2,610.00
IN : State GST 9.00 % 2,610.00
Total PO value with TAX INR 34,220.00
Registered Office Manufacturing location MANDIDEEP Manufacturing location PRITHLA ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited D-17, MPAKVN Industrial Area; MANDIDEEP, D-17, MPAKVN INDUSTRIAL AREA 49/5, MATHURA ROAD, VILLAGE District. Raisin - 462 046, Near Bhopal (M.P.), INDIA MANDIDEEP, DISTRICT. RAISEN- 462 PRITHLA, DISTRICT PALWAL Ph: +91 7480 400400, FAX: +91 7480 403393 & 400394 FAX: +91 7480 403393 & 400394 FAX: +91 1275 262055 PAN No. AABCV2466R, CIN (Corporate Identification Number):ECC No. AABCV2466RXM001 ECC No. AABCV2466RXM002 U04010MP1996PTC011430, IEC Number: 1197005293 TAN No. BPLV00336A TAN No. RTKV02346B
E le
ct ro
ni ca
l d oc
um en
t s ea
le d,
D at
e: 1
2. 07
.2 02
2 -
13 :1
0: 46
M E
S Z
Limit PO
Vendor
322510 Quality Solutions (India) Sector-76, BPTP Ground and First Floor, Plot No. X-4, 121006 Faridabad
Phone: Fax:
GST: 06AAAFQ1497K1Z0
General data
PO number 4503545824
Version no. 0 / 21/APR/2022
Issue date: 19/APR/2022
Purchaser: Tel. No.: Fax No.: E-mail:
Mr. Mukesh Nagar +917480423032 +9174804230325032 [email protected]
Total PO value with TAX: 206,500.00 INR
Delivery date: 30/APR/2022 Valid from: 19/APR/2022 Valid to: 30/APR/2022
Page 1 of 2
Reference area
Servise - Measuring & lifting Tools calibration at Likhu site
Offer reference: 22-23/018-s date 08.04.2022
Item line area
Item Material Quantity Price Amount
10 1 AU
Likhu_Tools Calibration Calibration of tools as per enclsoed list.
Overall limit: 175,000.00
Total item value 175,000.00 INR / 1 AU 175,000.00
Codeword: LIKHU 2 ( 2 x 22 MW +1 x 11 MW Project (WBS): C-90-834131-082-0109-501
Requestor: Vipin Singh
Total net item value INR 175,000.00
IN : Integrated GST 18.00 % 31,500.00
Total PO value with TAX INR 206,500.00
Registered Office Manufacturing location MANDIDEEP Manufacturing location PRITHLA ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited D-17, MPAKVN Industrial Area; MANDIDEEP, D-17, MPAKVN INDUSTRIAL AREA 49/5, MATHURA ROAD, VILLAGE District. Raisin - 462 046, Near Bhopal (M.P.), INDIA MANDIDEEP, DISTRICT. RAISEN- 462 PRITHLA, DISTRICT PALWAL Ph: +91 7480 400400, FAX: +91 7480 403393 & 400394 FAX: +91 7480 403393 & 400394 FAX: +91 1275 262055 PAN No. AABCV2466R, CIN (Corporate Identification Number):ECC No. AABCV2466RXM001 ECC No. AABCV2466RXM002 U04010MP1996PTC011430, IEC Number: 1197005293 TAN No. BPLV00336A TAN No. RTKV02346B
Limit PO Vendor
322510 Quality Solutions (India) Sector-76, BPTP Ground and First Floor, Plot No. X-4, 121006 Faridabad
Phone: Fax:
GST: 06AAAFQ1497K1Z0
General data
PO number 4503308062
Version no. 0 / 18/AUG/2021 Issue date: 18/AUG/2021
Purchaser: Tel. No.: Fax No.: E-mail:
Mr. Neeraj Kumar +911275288662 +911275262055 [email protected]
Total PO value with TAX: 346,831.50 INR
Delivery date: 20/AUG/2021 Valid from: 18/AUG/2021 Valid to: 30/SEP/2021
Page 1 of 2
Reference area
Calibration of equipment's at UTK/ Lab site, Nepal as per agreed offer on date 12.08.2021 with referance to offer scope CAL/ QUOT/21-22/209/G date 02.08.2021.
The final cost considering the work 3 week INR 293925 Excluding scope as per offer.
Item line area
Item Material Quantity Price Amount 10 1 AU
UTK_Calibration of instruments This PR is creted for the calibration of installed instrumentsin the power house like, RTD, DTT,Pressure gauge, OTI & WTI etc.
Overall limit: 293,925.00
Total item value 293,925.00 INR / 1 AU 293,925.00
Codeword: Upper Tamakoshi HEP Mandideep Project (WBS): C-90-970326-058-0137-110
Requestor: Vipin Singh
Total net item value INR 293,925.00
IN : Central GST 9.00 % 26,453.25
IN : State GST 9.00 % 26,453.25
Total PO value with TAX INR 346,831.50
Registered Office Manufacturing location MANDIDEEP Manufacturing location PRITHLA ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited ANDRITZ HYDRO Private Limited D-17, MPAKVN Industrial Area; MANDIDEEP, D-17, MPAKVN INDUSTRIAL AREA 49/5, MATHURA ROAD, VILLAGE District. Raisin - 462 046, Near Bhopal (M.P.), INDIA MANDIDEEP, DISTRICT. RAISEN- 462 PRITHLA, DISTRICT PALWAL Ph: +91 7480 400400, FAX: +91 7480 403393 & 400394 FAX: +91 7480 403393 & 400394 FAX: +91 1275 262055 PAN No. AABCV2466R, CIN (Corporate Identification Number):ECC No. AABCV2466RXM001 ECC No. AABCV2466RXM002 U04010MP1996PTC011430, IEC Number: 1197005293 TAN No. BPLV00336A TAN No. RTKV02346B
E le
ct ro
ni ca
l d oc
um en
t s ea
le d,
D at
e: 2
0. 08
.2 02
1 -
09 :0
8: 27
M E
S Z
Contract
Contract No: GEMC-511687755914187 Generated Date: 15-Dec-2022 Bid/RA/PBP No.: GEM/2022/B/2600411
Schedule Name:LPG INSTRUMENTS TO BE CALIBRATED ,HVJ INSTRUMENTS TO BE CALIBRATED ,C2C3 INSTRUMENTS TO BE CALIBRATED
Organisation Details Type: Central PSU Ministry: Ministry of Petroleum and Natural Gas Department: GAIL India Limited Organisation Name: GAIL India Limited Office Zone: VIJAIPUR
Buyer Details Designation: SR OFFICER 2 C N P Contact No.: 07544-274444-3810 Email ID: [email protected] GSTIN: 23AAACG1209J1Z4
Address: GAIL COMPLEX GAIL INDIA LIMITED VIJAIPUR DIST GUNA, MP - 473112, GUNA, MADHYA PRADESH-473112, India
Financial Approval Detail IFD Concurrence: No Designation of Administrative Approval: SENIOR MANAGER Designation of Financial Approval: MANAGER
Paying Authority Details Payment Mode: GAIL Designation: SO FINANCE MANOJ Email ID: [email protected] GSTIN: -
Address: GAIL COMPLEX GAIL INDIA LIMITED VIJAIPUR DIST GUNA, MP - 473112, Guna, MADHYA PRADESH-473112, India
Seller Details GeM Seller ID: Y6WC210003138034 Company Name: QUALITY SOLUTIONS INDIA Contact No.: 09868069836 Email ID: [email protected]
Address: PLOT NO. - X-4, X,QUALITY SOLUTIONS INDIA,SECTOR-76,Village/Town:- FARIDABAD, City:- FARIDABAD, FARIDABAD, HARYANA-121004, India
MSME verified: Yes MSME Registration number: UDYAM-HR-03-0016860 MSE Social Category: General MSE Gender: Male GSTIN: 06AAAFQ1497K1Z0
*GST / Tax invoice to be raised in the name of - Consignee
Product Details
# Item Description Ordered Quantity Unit Unit Price
(INR) Tax Bifurcation
(INR)
Price (Inclusive
of all Duties and
Taxes in INR)
1
Product Name : MICROMETER OUTSIDE 0 to 150 mm Brand : MICROMETER OUTSIDE Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 0 To 150 Mm HSN Code: 00998346
12 EA 223.02 NA 2,676.24
2
Product Name : Torque Wrench 49 to 105 kgf mtr Brand : Torque Wrench Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 49 To 105 Kgf Mtr HSN Code: 00998346
12 EA 764.64 NA 9,175.68
3
Product Name : TORQUE WRENCH 20 TO 100 FT Brand : TORQUE WRENCH Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 20 TO 100 FT HSN Code: 00998346
6 EA 764.64 NA 4,587.84
Product Name : DEPTH GAUGE MANUAL 0 TO 150MM
107 Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 0 To 1 INCH HSN Code: 00998346
39 EA 191.16 NA 7,455.24
108
Product Name : DIAL VERNIER CALIPER 0 to 300 MM Brand : DIAL VERNIER CALIPER Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 0 To 300 MM HSN Code: 00998346
6 EA 223.02 NA 1,338.12
109
Product Name : MICROMETER INSIDE 100 to 2100 mm Brand : MICROMETER INSIDE Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 100 To 2100 Mm HSN Code: 00998346
9 EA 955.8 NA 8,602.2
110
Product Name : BEVEL GAUGE COMBINATION SET Brand : BEVEL GAUGE Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: COMBINATION SET HSN Code: 00998346
12 EA 318.6 NA 3,823.2
111
Product Name : MICROMETER OUTSIDE 175 to 200 MM Brand : MICROMETER OUTSIDE Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: 175 To 200 MM HSN Code: 00998346
3 EA 223.02 NA 669.06
112
Product Name : HYDRAULIC TORQUE WRENCH Range to 10000PSI Brand : HYDRAULIC TORQUE WRENCH Brand Type : Unbranded Catalogue Status : Catalogue not verified by OEM Selling As : Reseller not verified by OEM Category Name & Quadrant : BOQ (Q3) Model: Range To 10000PSI HSN Code: 00998346
9 EA 764.64 NA 6,881.76
Total Order Value (in INR) 1,048,302.36
Consignee Detail
S.No Consignee Item Lot No. Quantity Delivery
Start After Delivery To Be
Completed By HYDRAULIC TORQUE WRENCH 470 to 11250 lbf ft
- 3 15-Dec-2022 14-Dec-2025
Torque Wrench 60 to 600 lbf ft Digital - 3 15-Dec-2022 14-Dec-2025
Torque Wrench 25 to 250 lbf ft Digital - 3 15-Dec-2022 14-Dec-2025
Torque Wrench 49 to105 kgf mtr - 3 15-Dec-2022 14-Dec-2025
Torque Wrench 49 to 105 kgf mtr - 12 15-Dec-2022 14-Dec-2025
Torque Wrench 14-56 kgf mtr - 9 15-Dec-2022 14-Dec-2025
Torque Wrench 7 to 35 kgf mtr - 18 15-Dec-2022 14-Dec-2025
Torque Wrench 5 to 23 kgf mtr - 18 15-Dec-2022 14-Dec-2025
Torque Wrench 5 to 22 kgf mtr - 6 15-Dec-2022 14-Dec-2025
Torque Wrench 3 to 14 kgf mtr - 9 15-Dec-2022 14-Dec-2025
Torque Wrench 1 to 7 kgf mtr - 6 15-Dec-2022 14-Dec-2025
Torque Wrench 0 pt 5 to 3 pt 5 kgf mtr - 12 15-Dec-2022 14-Dec-2025
Torque Wrench 0 pt 3 to 1 pt 2 kgf mtr - 6 15-Dec-2022 14-Dec-2025
GAUGE BLOCK WITH 2 DIAL GAUGE - 6 15-Dec-2022 14-Dec-2025
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Service PO. No: 2700028283 Date: 23.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
TERMS & CONDITIONS
PAYMENT TERMS: A) Payment after 15-30 days against Invoice GRN in finance based on satisfactory service/Performance.
BILLING INSTRUCTIONS: A) YOUR PAN / GST NO. / SAC CODE MUST BE PRINTED ON INVOICE. B) LATEST ESIC/WC/INSURANCE & PF CHALLAN (ECR) MUST BE ENCLOSED ALONG WITH INVOICE. In case you do not applicable for PF than have to declaration from vendor on letter head & salary slip of the engineer whose basic plus DA per month must be greater than 15000rs. with sign and stamp of company. If not eligible for ESI than have to submit Employee/Workman compensation policy or GPA (Group Personal Accident). Kindly note that invoice of any quarter cannot be processed in next quarter. C) OUR COMPLETE ADDRESS WITH PAN / GST NO. MUST BE ON INVOICE. D) SERVICE REPORT MUST ATTACHED DULY SIGN BY CUSTOMER & VENDOR. E) INVOICE WILL NOT BE PROCESSED, IF ABOVE MENTIONED DOCUMENTS WILL NOT BE ATTACHED ALONG WITH INVOICE. (INCASE OF DIGITAL INVOICE, PLEASE SEND ALL THESE DOCUMENTS SOFT COPY THROUGH E-MAIL) F) Billing address/shipping address is same as per our letter head.
SCOPE OF SERVICE PO: As per agreement you are requested to kindly execute the work as per details given below:
1. INSTRUMENTS CALIBRATION OF FRAME ASSEMBLY, ENGINE ASSEMBLY, PAINT SHOP, PAINT LAB, WELD SHOP, STANDARD ROOM, FINAL INSPECTION, SQA, SQA LAB, ELECTRINIC LAB & ENVIRONEMENT LAB
RATE OF INSTRUMENT CALIBRATION PER UNIT IS AS PER ANNEXURE 1
Scope of work and system cover is as per quotation and mutual discussion with HM5V.
Quotation Ref: E-MAIL REFERENCE Date: 13.12.2021
ACCEPTANCE CRITERIA:
Page 1 /
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Service PO. No: 2700028283 Date: 23.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
Compensation Act,1923, Contract Labour (regulations & Abolition) Act, 1970 and all other related legislation/ statutes for the time being in force, In case HMCL a suffers any loss or has to bear any penalty for any lapse on part of M/S QUALITY SOLUTIONS (INDIA) then, M/S QUALITY SOLUTIONS (INDIA). shall indemnify HMCL and shall make good the losses suffered by HMCL.
JURISDICTION: This SERVICE PO, the construction and enforcement of its terms, and the interpretation of the rights and duties of the parties here to shall be subject to and governed by the laws of India.
ANNEXURE 1:
1. SOUND LEVEL METER -SL4010 @ INR 1500 / UNIT 2. LUX LEVEL METER - LX101A @ INR 1000 / UNIT 3. ANEMOMETER - AM 4201 @ INR 4500 / UNIT 4. MANOMETER 2000 MBAR- PM9100 @ INR 1500 / UNIT 5. WEIGH BALANCE - MODEL DZ III (0-300 KG) @ INR 1500 / UNIT 6. PRESSURE GAUGE (0-7 BAR) @ INR 150 / UNIT 7. VACUUM GAUGE (0-760 MM HG) @ INR 150 / UNIT 8. TACHOMETER - PET - 1100R @ INR 1500 / UNIT 9. MULTI GAS LEAK DETECTOR - HONEYWELL BW MAX XT II @ INR 2000 / UNIT 10. PRESSURE GUAGE (PG) RANGE - (0-28 BAR) LC - 1 BAR @ INR 150 / UNIT 11. TEMP GUAGE RANGE - (0-200 C) @ INR 600 / UNIT 12. CONDUCTIVITY SENSOR @ INR 425 / UNIT 13. DIFFERENTIAL PRESSURE SENSOR @ INR 650 / UNIT 14. PH SENSOR @ INR 1300 / UNIT 15. PRESSURE SENSOR @ INR 650 / UNIT 16. HUMIDITY SENSOR @ INR 1000 / UNIT 17. TDS SENSOR @ INR 850 / UNIT 18. TEMPRATURE SENSOR @ INR 450 / UNIT 19. VOC SENSOR @ INR 850 / UNIT 20. PRESSURE GUAGE (PG) RANGE - (0-280 BAR) LC - 10 BAR @ INR 150 / UNIT 21. DIGITAL TEMP CONTROLLER RANGE (0-120) LC-1 DEGREE @ INR 600 / UNIT 22. DIGITAL TORQUE WRENCH TESTER @ INR 18000 / UNIT 23. RPM CALIBRATION - DIGITAL ENCODER @ INR 1500 / UNIT
Page 3 /
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Service PO. No: 2700028283 Date: 23.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
24. TYRE PRESSURE GAUGE @ INR 150 / UNIT 25. TEMPRETURE METER-FLUKE @ INR 1200 / UNIT 26. COMPRESSION PRESSURE GAUGE @ INR 650 / UNIT 27. EVAPO TESTING MACHING-LEAK VENT,PURGE @ INR 1500 / UNIT 28. DYNOMETER-FI @ INR 1200 / UNIT 29. DYNOMETER-VEHICLE TESTING LAB @ INR 1200 / UNIT 30. DYNOMETER-ENGINE TESTING LAB @ INR 1200 / UNIT 31. SPEEDOMETER TEST RIG @ INR 1500 / UNIT 32. MOISTURE METER @ INR 1500 / UNIT 33. THERMO GRAVIMETRIC ANALYSER @ INR 12000 / UNIT 34. WEATHEROMETER @ INR 1200 / UNIT 35. MICROSCOPE @ INR 2000 / UNIT 36. IMAGE ANALYZER @ INR 1615 / UNIT 37. SALT SPRAY CHAMBER @ INR 1500 / UNIT 38. CASS TEST CHAMBER @ INR 1500 / UNIT 39. HUMIDITY CHAMBER WK 1000 /40 @ INR 1500 / UNIT 40. SPECTROMETER @ INR 2500 / UNIT 41. DIGITAL ROCKWELL HARDNESS TESTER @ INR 2500 / UNIT 42. MICRO HARDNESS TESTER-VICKERS @ INR 3500 / UNIT 43. ROCKWELL HARDNESS TESTER - 1 NO'S @ INR 2500 / UNIT 44. ROCKWELL HARDNESS TESTER - 1 NO'S @ INR 2500 / UNIT 45. VICKER CUM BRINELL HARDNESS TESTER TV250 @ INR 3500 / UNIT 46. SHORE A-DIGITAL @ INR 1200 / UNIT 47. SHORE A- ANALOG @ INR 1200 / UNIT 48. WATER CHAMBER @ INR 1500 / UNIT 49. COATING THICKNESS GAUGE - FERROUS/NON-FERROUS @ INR 250 / UNIT 50. COATING THICKNESS GAUGE - ZN (BLACK) @ INR 250 / UNIT 51. COATING THICKNESS GAUGE - FERROUS/NON-FERROUS @ INR 250 / UNIT 52. COATING THICKNESS GAUGE - NI-CR (YELLOW) @ INR 250 / UNIT 53. COATING THICKNESS GAUGE - ABS @ INR 250 / UNIT 54. UNIVERSAL TENSILE TESTING MACHINE - 40 T @ INR 5000 / UNIT 55. UNIVERSAL TENSILE TESTING MACHINE - 5T @ INR 5000 / UNIT 56. WEIGH BALANCE-200 GMS-0.1MG L.C. @ INR 750 / UNIT 57. FTIR- SPECTROMETER @ INR 2500 / UNIT
Page 4 /
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Service PO. No: 2700028283 Date: 23.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
58. OVEN 350°C @ INR 1500 / UNIT 59. FURNACE-750 (450X450X600) @ INR 5000 / UNIT 60. LASER TEMP. INDICATER-750º C @ INR 400 / UNIT 61. MILLIPORE @ INR 300 / UNIT 62. GLOSS METER @ INR 1500 / UNIT 63. ADHESION CROSS CUTTER GAUGE @ INR 1000 / UNIT 64. HYGROMETER 1 @ INR 1500 / UNIT 65. HYGROMETER 2 @ INR 1500 / UNIT 66. STANDARD FOIL SET @ INR 1200 / UNIT 67. PUSH PULL GUAGE @ INR 1800 / UNIT 68. GEAR ROLL TESTER @ INR 2000 / UNIT 69. DUROMETER RUBBER HARDNESS TESTER SHORE A @ INR 500 / UNIT 70. DC POWER SUPPLY @ INR 1500 / UNIT 71. SPEEDOMETER TEST RIG @ INR 1500 / UNIT 72. MULTIMETER @ INR 808 / UNIT 73. RR UNIT TEST RIG @ INR 1800 / UNIT 74. SIDE STAND SENSOR TEST RIG @ INR 1800 / UNIT 75. HORN TEST RIG @ INR 1800 / UNIT 76. HORN TEST RIG @ INR 1800 / UNIT 77. IGNITION COIL TEST RIG @ INR 1800 / UNIT 78. STARTER RELAY AND WINKER RELAY TEST RIG @ INR 1800 / UNIT 79. ACG TEST RIG @ INR 1800 / UNIT 80. CBS BRAKE FORCE TESTING MACHINE @ INR 1800 / UNIT 81. OSCILLOSCOPE @ INR 2375 / UNIT 82. STOP WATCH @ INR 400 / UNIT 83. LUX METER @ INR 1000 / UNIT 84. WEIGHT/LETER CUP @ INR 750 / UNIT 85. FLEXIBILITY CONICAL MENDRAL @ INR 800 / UNIT 86. ABRASSION TESTER @ INR 600 / UNIT 87. SCRATCH TESTER @ INR 500 / UNIT 88. IMPACT TESTER @ INR 700 / UNIT 89. HEGMAN GAUGE @ INR 500 / UNIT 90. GLOSS METER @ INR 1500 / UNIT 91. SPECTROPHOTOMETER (#E) @ INR 2500 / UNIT
Page 5 /
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Service PO. No: 2700028283 Date: 23.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
92. PH METER (PROBE) @ INR 650 / UNIT 93. DFT METER (NF) @ INR 1250 / UNIT 94. BAKE OVEN - 350°C (UF110) (RTD) @ INR 850 / UNIT 95. RESISTIVITY METER @ INR 1000 / UNIT 96. TTR @ INR 400 / UNIT 97. IR TEMPERATURE GUN (IRX-67) @ INR 300 / UNIT 98. WATER BATH CHAMBER (6 KW) (RTD) @ INR 1500 / UNIT 99. CONDUCTIVITY METER (PROBE) @ INR 425 / UNIT 100. PENCIL HARDNESS TESTER @ INR 1200 / UNIT 101. ANEMOMETER @ INR 4500 / UNIT 102. SEPARATING FUNNEL @ INR 750 / UNIT 103. MEASURING CYLINDER 500 ML @ INR 750 / UNIT 104. MEASURING CYLINDER 250 ML @ INR 600 / UNIT 105. MEASURING CYLINDER 5000 ML @ INR 1000 / UNIT 106. ECOTESTR EC LOW @ INR 1500 / UNIT 107. ECOTESTR PH 1 @ INR 1500 / UNIT 108. ADHESION TESTER 1 MM @ INR 600 / UNIT 109. ADHESION TESTER 2 MM @ INR 600 / UNIT 110. DOI METER (MICRO-WAVE SCAN METER) @ INR 1500 / UNIT 111. DUST COUNTER METER @ INR 400 / UNIT 112. MILLIPORE PRESSURE GAUGE (-760 MM HG) @ INR 150 / UNIT 113. CROCKMETER @ INR 1200 / UNIT 114. ADHESION CROSS CUT GUIDE @ INR 600 / UNIT 115. 2D HEIGHT GUAGE (RANGE 600 MM) @ INR 500 / UNIT 116. COMPARATOR STAND (300 X 300) @ INR 700 / UNIT 117. SURFACE PLATE ( 1000*1000 MM) @ INR 3000 / UNIT 118. SURFACE PLATE ( 630*630 MM) @ INR 1190 / UNIT 119. SURFACE PLATE ( WITH STAND 1.6M*1M) @ INR 4900 / UNIT 120. BENCH CENTRE (300*125 MM) @ INR 2000 / UNIT 121. BENCH CENTRE JAFUJI C.I (500*160 MM) @ INR 2000 / UNIT 122. LINEAR HEIGHT GAUGE (DIGIMAR) @ INR 500 / UNIT 123. BOX ANGLE PLATE (250*150*175) @ INR 500 / UNIT 124. ANGLE PLATE (300*200*225) @ INR 500 / UNIT 125. MASTER RING (ULM - DIA METER) @ INR 800 / UNIT
Page 6 /
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Service PO. No: 2700028283 Date: 23.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
126. GEAR ROLL TESTER @ INR 2000 / UNIT 127. TORQUE WRENCH TESTER (50 NM) @ INR 18000 / UNIT 128. TORQUE WRENCH TESTER (100 NM) @ INR 18000 / UNIT 129. DIGITAL WEIGHING BALANCE (DAB 220) 0 TO 220 G. @ INR 750 / UNIT 130. THERMAL EMAGER @ INR 1615 / UNIT 131. OSCILLOSCOPE @ INR 2375 / UNIT 132. EARTH CLAMP TESTER @ INR 1140 / UNIT 133. INSULATION TESTER @ INR 950 / UNIT 134. MULTIMETER @ INR 808 / UNIT 135. IR THERMOMETER @ INR 1615 / UNIT 136. CLAMP TESTER @ INR 808 / UNIT 137. CLAMPRITE GAUGE @ INR 1900 / UNIT 138. SPIRIT LEVEL @ INR 500 / UNIT 139. CURRENT PROBE @ INR 700 / UNIT 140. AMMETER (DIGITAL) RANGE (0-150 AMP) LC-1 AMP @ INR 150 / UNIT 141. VOLT METER (DIGITAL) RANGE 90-50 LPM) LC-1 LPM @ INR 130 / UNIT 142. GAS FLOW PG (LPM) RANGE - (0-50 LPM) LC -1 LPM @ INR 200 / UNIT 143. PRESSURE GUAGE (PG) RANGE - (0-6 BAR) LC - 0.5 BAR @ INR 150 / UNIT 144. TEMPRATURE SENSOR @ INR 600 / UNIT 145. DIGITAL PRESSURE SWITCH @ INR 150 / UNIT 146. BANANA TYPE COATING THICKNESS GAUGE @ INR 250 / UNIT 147. RUBBER MICRO HARDNESS TESTER @ INR 500 / UNIT
HM5V PLANT INSTRUMENTS CALIBRATION
S.No. Service No. Description Qty UOM Unit Price (Rs.)
Amount (Rs.)
1 3010932 CALIBRATION CHARGES OF INSTRUMENTS
1.00 Activ.unit 205,310.00 205,310.00
2 3010932 CALIBRATION CHARGES OF INSTRUMENTS
1.00 Activ.unit 174,130.00 174,130.00
3 3010932 CALIBRATION CHARGES OF INSTRUMENTS
1.00 Activ.unit 20,950.00 20,950.00
4 3010932 CALIBRATION CHARGES OF INSTRUMENTS
1.00 Activ.unit 46,991.00 46,991.00
Page 7 /
S.No. Service No. Description Qty UOM Unit Price (Rs.)
Amount (Rs.)
5 3010932 CALIBRATION CHARGES OF INSTRUMENTS
1.00 Activ.unit 29,866.00 29,866.00
Total Cost (Rs.) 477,247.00
The total cost is Rs. 477,247.00 /- (RUPEES FOUR HUNDRED SEVENTY-SEVEN THOUSAND TWO HUNDRED FORTY-SEVEN ONLY)
For Hero MotoCorp Ltd.
SANJAY KUMAR SABLOK Authorized Signatory
Page 8 /
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Purchase order No: 2700028227 Date: 12.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
TERMS & CONDITIONS
PAYMENT TERMS: A) Payment after 15-30 days against Invoice GRN in finance based on satisfactory service/Performance.
BILLING INSTRUCTIONS: A) YOUR PAN / GST NO. / SAC CODE MUST BE PRINTED ON INVOICE. B) LATEST ESIC/WC/INSURANCE & PF CHALLAN (ECR) MUST BE ENCLOSED ALONG WITH INVOICE. In case you do not applicable for PF than have to declaration from vendor on letter head & salary slip of the engineer whose basic plus DA per month must be greater than 15000rs. with sign and stamp of company. If not eligible for ESI than have to submit Employee/Workman compensation policy or GPA (Group Personal Accident). Kindly note that invoice of any quarter cannot be processed in next quarter. C) OUR COMPLETE ADDRESS WITH PAN / GST NO. MUST BE ON INVOICE. D) SERVICE REPORT MUST ATTACHED DULY SIGN BY CUSTOMER & VENDOR. E) INVOICE WILL NOT BE PROCESSED, IF ABOVE MENTIONED DOCUMENTS WILL NOT BE ATTACHED ALONG WITH INVOICE. (INCASE OF DIGITAL INVOICE, PLEASE SEND ALL THESE DOCUMENTS SOFT COPY THROUGH E-MAIL) F) Billing address/shipping address is same as per our letter head.
SCOPE OF SERVICE PO: As per agreement you are requested to kindly execute the work as per details given below:
1. CALIBRATION OF UTILITY INSTRUMENTS (YEARLY)
Scope of work and system cover is as per quotation and mutual discussion with HM5V.
Quotation Ref: CAL/QUOT/21-22/423/G (RATES AS PER LAST YEAR) Date: 24.11.2021
ACCEPTANCE CRITERIA: A) Desired accuracy (as per standard) of the Equipment must be maintained. B) Equipment must be in working condition throughout the year. C) M/S QUALITY SOLUTIONS (INDIA) ensure for above said work Equipment which you will used or repair work or
Page 1 / 5
Purchase Order No: 2700028227
Date: 12.12.2022
QUALITY SOLUTIONS (INDIA) B 451, 452 22ND FLOOR, NEHRU GROUND FARIDABAD 121001
Purchase order No: 2700028227 Date: 12.12.2022 GSTN No. : 24AAACH0812J1Z2
CIN No: L35911DL1984PLC017354 PAN No: AAACH0812J
Vendor Code: 312140 Terms of Payments:HMCL - Payable after 15 days Taxes: GST, As applicable Please invoice & deliver to Hero MotoCorp Ltd. - Vadodra 102,GIDC,Novariya ,Halol Distt. Godhra Godhra-Vadodara Highway 389350, GUJARAT, India
suffered by HMCL.
JURISDICTION: This SERVICE PO, the construction and enforcement of its terms, and the interpretation of the rights and duties of the parties here to shall be subject to and governed by the laws of India.
CALIBRATION OF UTILITY INSTRUMENTS
S.No. Service No. Description Qty UOM Unit Price (Rs.)
Amount (Rs.)
1 3002493 PRESSURE GAUGE CALIBRATION 286.00 Activ.unit 150.00 42,900.00
2 3002494 TEMPERATURE GAUGE CALIBRATION 37.00 Activ.unit 300.00 11,100.00
3 3010932 CALIBRATION CHARGES OF INSTRUMENTS
14.00 Activ.unit 150.00 2,100.00
4 3003673 TEMPERATURE CONTROLLER CALIBRATION
3.00 Activ.unit 150.00 450.00
5 3015463 WATER FLOW METER CALIBRATION CHARGES
39.00 Piece(s) 825.00 32,175.00
6 3000230 TESTING & CALIBRATION OF ENERGY METER
151.00 Activ.unit 1,080.00 163,080.00
Total Cost (Rs.) 251,805.00
The total cost is Rs. 251,805.00 /- (RUPEES TWO HUNDRED FIFTY-ONE THOUSAND EIGHT HUNDRED FIVE ONLY)
For Hero MotoCorp Ltd.
SANJAY KUMAR SABLOK Authorized Signatory
Page 3 / 5
Contract
Contract No: GEMC-511687775770517 Contract Generated Date: 29-Sep- 2022 Bid/RA/PBP No.: GEM/2022/B/2258708
Organisation Details Type: Central Autonomous Ministry: Ministry of Labour and Employment Department: Employees State Insuarnce Corporation Organisation Name: Employees State Insurance Corporation Office Zone: Model Hospital Basaidarapur
Buyer Details Designation: Deputy Director General Branch Contact No.: 011-25970730- Email ID: [email protected] GSTIN: -
Address: ESIC MODEL HOSPITAL BASAIDARAPUR NEW DELHI, WEST DELHI, DELHI-110015, India
Financial Approval Detail IFD Concurrence: No Designation of Administrative Approval: MS Designation of Financial Approval: AD(F)
Paying Authority Details Payment Mode: Offline Designation: Assistant Director Email ID: [email protected] GSTIN: -
Address: ESIC MODEL HOSPITAL BASAIDARAPUR NEW DELHI, West Delhi, DELHI-110015, India
Consignee Details
S.No Consignee Name & Address Service Description
1
Contact: 011-25970730- Email ID: [email protected] GSTIN: - Address: ESIC MODEL HOSPITAL BASAIDARAPUR NEW DELHI, WEST DELHI, DELHI-110015, India
Calibration Services
Service Provider Details GeM Seller ID: Y6WC210003138034 Company Name: QUALITY SOLUTIONS INDIA Contact No.: 09868069836 Email ID: [email protected]
Address: PLOT NO. - X-4, X,QUALITY SOLUTIONS INDIA,SECTOR-76,Village/Town:- FARIDABAD, City:- FARIDABAD, FARIDABAD, HARYANA-121004, India
MSME verified: Yes MSME Registration number: UDYAM-HR-03-0016860 MSE Social Category: General MSE Gender: Male GSTIN: 06AAAFQ1497K1Z0
*GST / Tax invoice to be raised in the name of - Buyer
Service Details
Service Start Date (latest by) : 17-Oct-2022 Service End Date : 16-Oct-2024
Equipment/instrument of buyer in working condition Yes
If any spares are required Yes
Details of Calibration Medical device calibration
Calibration location Buyer premises (onsite)
Minor/major repair required as part of calibration Prior approval should be taken before minor major repair
Reports required Calibration report
Eligible Calibration Labs NABL Labs
Timeline for completing the calibration once instrument is handed over by buyer
Depending on the instrument, schedule to be provided in Scope of Work
Type of Calibration required Medical
Category Name : Calibration Services
Billing Cycle : weekly
Description Quantity (input 1)
Lumpsum Cost for Calibration during contract period (INR)
1 642309.400
Total Amount (Formula) : (Lumpsum Cost for Calibration during contract period*Quantity (input 1))
Total Value without Addons (INR) 642309.4
Total Addon Value (INR) 0
Total Value Including Addons (INR) 642309.4
Amount of Contract Total Contract Value Including All Duties and Taxes (INR) 642309.4
SLA Details
SERVICE STC
SPECIAL TERMS AND CONDITIONS FOR CALIBRATION SERVICE
1. Preamble
All Calibrationservice-relatedcontracts placed through GeM shall be governed by the following set of Terms and Conditions: I. General terms and conditions for Goods and Services. II. Service STC contained in this document III. BID / Reverse Auction specific ATC B. The above terms and conditions are in reverse order of precedence i.e. ATC shall supersede Service specific STC which shall supersede GTC, whenever there are any conflicting provisions. C. This document represents the Special Terms and Conditions (“STC”) and the Service Level Agreement (SLA) governing the contract between the Buyer and Service provider. The purpose of this document is to outline the scope of work, stakeholders’obligations and terms and conditions of all services covered as mutually understood by the stakeholders.
2. Objectives and Goal
The objective of this document is to ensure that all the special terms and conditions are in place to ensure consistent delivery of services to the Buyer by the Service provider. The goal of this document is to:
Provide clear reference to service ownership, accountability, roles and responsibilities of both parties Present a clear, concise and measurable description of services offered to the Buyer Establish terms and conditions for all the involved stakeholders, it also includes the actions to be taken in case of failure to comply with conditions specified To ensure that both the parties understand the consequences in case of termination of services due to any of the stated reasons
This document will act as a reference document that both the parties have understood the above-mentioned terms and conditions and have agreed to comply by the same.
3. Stakeholders
The main stakeholders associated are:
Buyer: The Buyer is responsible to provide clear instructions, approvals and timely payments for the services availed as per the contractual terms Service provider: The Service provider is responsible to provide all the required services in timely manner. The Service provider may also include seller, supplier/bidder/contractor, any authorized agents, assignees, successors, and nominees as per the context and as described in the document
The responsibilities and obligations of the stakeholders have been outlined in this document. The document also encompasses payment terms and deduction in case of non-adherence to the defined terms and conditions.
4. Service Scope
This service maybe availed to carry outcalibration services for on-board/commissioned equipment/instrument related to plant & machinery or laboratory equipment as the case maybe.Maintenance activities of the instrument could also be covered in the service scope as the case maybe.
The details of instruments to be calibrated and/or maintained need to be specified by the Buyer in the bid document. The calibration may be at Buyers’ premises or Service provider as specified in the bid document.
5.Terms and Conditions
5.1 Buyer’s Obligations
Any equipment data/drawings and necessary work permits to access the Buyers’ premises are to be provided by Buyer. The Engineer-In-Charge (EIC/EICs) or supervisor nominated by Buyer organization shall look after general supervision and direction of the work.
In case calibration is happening at Buyer’s premises, Buyer should provide/facilitate safe and secure place for onsite calibration and testing equipment of the Service provider.
In the absence of any Standard/ Specification/Code of practice for detailed specifications covering any part of the work covered in this tender, the instructions/directions of the Engineer-in- Charge will be binding on the Service provider. Price Variation Clause: "It is advisable to include Price Variation Clause in the long term contracts to take care of the increase/decrease in prices of various ingredients which majorly affect the overall price of the service. Buyers are therefore advised to include the Price Variation Clause (PVC) in the bid document through ATC for long term contracts. The additional payment, if any, on account of PVC can be done offline till such time online functionality is developed on GeM."
5.2 Service provider’s Obligations
Standards used for calibration must be traceable to National /international standard. The Service providers must provide traceability certificates of instrument used for calibration / validation of listed instruments. Calibration certificate and traceability certificate shall be issued after carrying out calibration, and it should be valid for the time decided by the Buyer.
Before commencement of the job, the test and/or calibration procedures may need to be submitted to EIC or competent authority for approval.
In case calibration is happening at Buyer premises, work shall be planned in such that there is no disruption to any power supply to the critical equipment. If any special equipment is provided by Buyer organization for performance of any job, the Service provider shall be responsible for accounting of the same and returning the same before leaving site.
5.3 Standard Terms and Conditions
/ Save Energy for Benefit of Self and Nation / Dial 1912 for Complaints on Electricity
CIN: L40101HR1975GOI032564
Power Behind Green Power
चमेरा पावर ेशन-1 Chamera Power Station-1
, / Khairi, Distt: Chamba Himachal Pradesh -
176325 / Tel.: 9816503004
Minutes of Meeting
Held on 22.11.2024 between NHPC Ltd., CPS-I, Khairi and M/s Quality Solutions India, Faridabad regarding work of Calibration of Various Instruments & Energy Meters at CPS-1.
Ref: GEMC-511687793500567 Dated: 02.03.2023
Representative of M/s Quality Solutions India arrived at site on 19.11.2024 for Calibration of Various Instruments & Energy Meters at CPS-1.
After arriving at site, Calibration of Various Electrical & Mechanical Instruments and Energy Meters etc. (As per attached Annexure-A & Annexure-B) was carried out by service Engineer.
02 Nos. Dielectric Tester and 08 Nos. Pressure Guage was not calibrated due to its functional issues.
Firm shall submit the test reports as per T&C of work order.
Representative of M/s Quality Solutions India is leaving the site on 22.11.2024.
NHPC Ltd., CPS-I Khairi M/s Quality Solutions India, Faridabad
Sh. Niraj Kumar, SM (E) Sh. Abdul Khan, Service Engineer
Sh. Ankur Asthana, Manager (E) Sh. Manoj Kumar, Service Engineer
Sh. Ranjan Kumar, DM(E)
Quality Solutions (India) [Q.S.I.] is a state-of-art test equipment calibration facility
equipped with international traceable and high precision master instruments to
serve customers with an exhilarating calibration experience. We provide
calibration and testing services on portable and fixed test and measuring
equipment. We will maintain your test equipment according to the manufacturers
or customer’s recommendations. We provide written documentation of all
services and calibrations performed.
QSI is accredited to ISO/IEC 17025:2017 by NABL (National Accreditation Board for Testing and
Calibration Laboratories), which is a Constituent Board of Quality Council of India. The management
system requirements in ISO/IEC 17025:2017 are written pertinent to laboratory operations.
This allows QSI to provide state-of-the-art that precisely measure scale, flow, weight, pressure,
vacuum, temperature and calibrate almost any mechanical, or dimensional instrument, and many
more parameters.
Lab Calibration Services- When looking for laboratory calibration services, you want one state-of-the-
art laboratory that can help you meet all your business requirements. That’s just what we will deliver
to you.
Onsite Calibration Services- For the ultimate convenience, choose onsite calibration services from
QSI. Our expertise will handle all aspects of onsite calibration services, from scheduling to document
delivery.
Annual Maintenance Contract (AMC) to ensure against any possible malfunctioning. You can choose
out of the various schemes.
QSI covers more than 80 % of industries of North India and has its presence in Gujarat, Kolkata, Tamil
Nadu, Assam becoming market leader for instrument calibration and first preference of global
customers.
QSI has been now serving in UNOPS which is the operational arm of the United Nations-UN, serving
our customers globally in the field of Automation, Pharmaceutical and FDA industry.
Quality Solutions (India) has also been awarded with National Award for Outstanding
Entrepreneurship in MSME (Service) in 2012.
Our client base is from Automotive, Government Sector, Agriculture, Petroleum, Food, Hotel,
Healthcare, Electrical and their ancillaries Industry.
Thanks, and Regards
Ishaan Narang
+91-9999683957 Quality Solutions (India) Plot No: X-04, Sector- 76 Faridabad (121006) Haryana India [THE NATIONAL AWARD WINNER (LABORATORY)] Please visit: - www.qualitysolutions.in
Our ELITE Customers of Automobile Industry
Our ELITE Customers of Food Industry
Our ELITE Customers
Petroleum Industry
Defence Industry
Government Sector
QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED has been assessed and accredited in accordance with the standard
ISO/IEC 17025:2017 ''General Requirements for the Competence of Testing &
Calibration Laboratories'' for its facilities at
PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
in the field of
CALIBRATION Certificate Number: CC-2717
Issue Date: 09/07/2024 Valid Until: 08/07/2026
This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continued satisfactory compliance to the above standard & the relevant requirements of NABL.
(To see the scope of accreditation of thislaboratory, you may also visit NABL website www.nabl-india.org)
Name of Legal Entity: QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED
Signed for and on behalf of NABL
N. Venkateswaran Chief Executive Officer
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 1 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
Permanent Facility
1
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Measure)
AC High Voltage @ 50 Hz
Using High voltage probe with DMM by Direct Method
1 kV to 28 kV 5.80 %
2
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Measure)
Capacitance @ 1 kHz
Using LCR Q meter by Direct Method 1 nF to 1000 nF 1.60 %
3
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Measure)
Inductance @ 1 kHz Using LCR -Q Meter by Direct Method 1 mH to 1 H 1.22 %
4
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC Current @ 50 Hz Using 5 ½ digit Multi function calibrator by Direct Method
1 A to 10 A 0.62 % to 0.22 %
5
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC Current @ 50 Hz Using 5½ digit Multifunction calibrator by Direct Method
2 mA to 2000 mA 0.27 % to 0.22 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 2 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
6
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC Current @ 50 Hz Using 5 ½ digit Multifunction calibrator by Direct Method
200 µA to 2 mA 0.45 % to 0.27 %
7
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC High Current @ 50 Hz
Using 5 ½ digit Multi function calibrator with current coil by Direct Method
100 A to 1000 A 1.90 % to 1 %
8
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC High Current @ 50 Hz
Using 5½ digit Multi function calibrator with current coil by Direct Method
20 A to 100 A 1.90 %
9
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC Voltage @ 50 Hz Using 5½ digit Multi function calibrator by Direct Method
10 mV to 200 mV 0.40 % to 0.26 %
10
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC Voltage @ 50 Hz Using 5½ digit Multi function calibrator by Direct Method
100 V to 1000 V 0.42 % to 0.20 %
11
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
AC Voltage @ 50 Hz Using 5½ digit Multi function calibrator by Direct Method
200 mV to 200 V 0.26 % to 0.42 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 3 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
12
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
Conductivity Meter Using Conductivity simulator by simulation method
1 µS/cm to 1000 µS/cm (1.000028 Mohm to 1.00010 Kohm)
1.19 %
13
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Source)
PH Meter Using pH simulator by simulation method
0 pH to 12 pH (414.12 mV to (-) 414.12 mV)
0.09 pH
14
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC High Voltage Using High voltage probe with DMM by Direct Method
1 kV to 10 kV 4.43 %
15
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC Resistance (2 Wire)
Using 6 ½ digit DMM by Direct Method 1 ohm to 10 ohm 0.36 % to 0.18 %
16
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC Resistance (2 Wire)
Using 6 ½ digit DMM by Direct method 10 ohm to 100 ohm 0.18 % to 0.05 %
17
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC Resistance (2 Wire)
Using 6 ½ digit DMM by Direct method
100 kohm to 2 Mohm 0.05 % to 0.06 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 4 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
18
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC Resistance (2 Wire)
Using 6 ½ digit DMM by Direct method
100 ohm to 100 kohm 0.05 %
19
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC Resistance (2 Wire)
Using 6 ½ digit DMM by Direct method
2 Mohm to 200 Mohm 0.06 % to 1.35 %
20
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
Capacitance @ 1 kHz
Using Std. capacitance box by Direct Method
1 nF to 1 µF 3.50 %
21
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Current Using 5½ digit Multi function calibrator by Direct Method
1 A to 10 A 0.26 % to 0.50 %
22
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Current Using 5 ½ digit Multi function calibrator by Direct Method
2 mA to 2000 mA 0.20 % to 0.40 %
23
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Current Using 5 ½ digit Multi function calibrator by Direct Method
200 µA to 2 mA 0.38 % to 0.20 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 5 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
24
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Resistance (at 1000 V )
Using Megaohm Box By Direct Method 2 Gohm 7.74 %
25
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Resistance (at 1000 V)
Using Megaohm Box by Direct Method 20 Gohm 7.74 %
26
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Resistance (at 1000 V)
Using Stdandard Megaohm Box by Direct Method
200 Mohm 4.27 %
27
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Resistance(4 Wire/ 2 Wire)
Using Decade Resistance Box, Megohm Box by Direct Method
1 kohm to 200 Mohm 4.27 %
28
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Resistance(4 Wire/ 2 Wire)
Using Std. Resistance Box By Direct Method
1 mohm to 1 kohm 3.60 %
29
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Voltage Using 5 ½ digit Multifunction calibrator , Direct Method
1 mV to 200 mV 1.90 % to 0.14 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 6 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
30
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Voltage Using 5½ digit Multi function calibrator , Direct Method
200 mV to 200 V 0.14 % to 0.18 %
31
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC Voltage Using 5 ½ digit Multifunction calibrator by Direct Method
200 V to 1000 V 0.18 % to 0.15 %
32
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC- High Current Using 5 ½ digit Multi function calibrator with current coil by Direct Method
100 A to 1000 A 1.42 % to 1 %
33
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
DC- High Current Using 5 ½ digit Multi function calibrator with current coil by Direct Method
20 A to 100 A 1.91 % to 1.42 %
34
ELECTRO- TECHNICAL- DIRECT CURRENT (Source)
Inductance @ 1 kHz Using Std. Inductance decade box By Direct Method
1 mH to 1 H 3.52 %
35
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
J-Type Thermocouple
Using Process calibrator by direct method
(-) 200 °C to 500 °C 1.50 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 7 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
36
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
K Type Thermocouple
Using Process calibrator by Direct method
(-) 200 °C to 1200 °C 1.50 °C
37
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
R Type Thermocouple
Using Process calibrator by Direct method
200 °C to 1600 °C 1.86 °C
38
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
RTD ( PT-100 )Type Using Process calibratior by Direct method
(-) 200 °C to 795 °C 1.50 °C
39
ELECTRO- TECHNICAL- TIME & FREQUENCY (Measure)
Frequency Using 6 ½ digit DMM by Direct Method 50 Hz to 1 MHz 0.12 %
40
ELECTRO- TECHNICAL- TIME & FREQUENCY (Measure)
Time Using Time interval calibrator by Comparison Method
1 s to 80000 s 4.3 % to 0.03 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 8 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
41 FLUID FLOW- FLOW MEASURING DEVICES
Volume Flow Rate: Rotameter , Air Flow meter , Flow Calibrator , Gas Flow meter , Sampler . PM10 & PM2.5 , Flow measuring Equipment's
Using Laminar Gas Flow Calibrator by Comparison method
1 slpm to 100 slpm 2.96 %rdg
42 MECHANICAL- ACCELERATION AND SPEED
RPM meter of Centrifuge, Stroboscope, RPM meter of Vibrating machine, RPM meter of Shaker, RPM meter of Btumam Extracter
Using Digital Tachometer by Comparison method
>100 rpm to 1000 rpm 1 % of reading
43 MECHANICAL- ACCELERATION AND SPEED
RPM meter of Centrifuge, Stroboscope, RPM meter of Vibrating machine, RPM meter of Shaker, RPM meter of Btumam Extracter
Using Digital Tachometer by Comparison method
>1000 rpm to 10000 rpm 1.6 % of reading
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 9 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
44 MECHANICAL- ACCELERATION AND SPEED
RPM meter of Centrifuge, Stroboscope, RPM meter of Vibrating machine, RPM meter of Shaker, RPM meter of Btumam Extracter
Using Digital Tachometer by Comparison method
>10000 rpm to 90000 rpm 0.05 % of reading
45 MECHANICAL- ACCELERATION AND SPEED
RPM meter of Centrifuge, Stroboscope, RPM meter of Vibrating machine, RPM meter of Shaker, RPM meter of Btumam Extracter
Using Digital Tachometer by Comparison method
10 rpm to 100 rpm 3.5 % of reading
46 MECHANICAL- ACCELERATION AND SPEED
Tachometer - Contact Type
Using Digital Tachometer, RPM source by Comparison method
>100 rpm to 1000 rpm 1 % of reading
47 MECHANICAL- ACCELERATION AND SPEED
Tachometer - contact Type
Using Digital Tachometer, RPM source by Comparison method
>1000 rpm to 8000 rpm 0.4 % of reading
48 MECHANICAL- ACCELERATION AND SPEED
Tachometer - Contact Type
Using Digital Tachometer, RPM source by Comparison method:
10 rpm to 100 rpm 3.5 % of reading
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 10 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
49 MECHANICAL- ACCELERATION AND SPEED
Tachometer - Non contact Type
Using Digital Tachometer, RPM source by Comparison method
>100 rpm to 1000 rpm 1.6 % of reading
50 MECHANICAL- ACCELERATION AND SPEED
Tachometer - Non contact Type
Using Digital Tachometer, RPM source by Comparison method
>1000 rpm to 10000 rpm 1.6 % of reading
51 MECHANICAL- ACCELERATION AND SPEED
Tachometer - Non contact Type
Using Digital Tachometer, RPM source by Comparison method::
>10000 rpm to 90000 rpm 0.05 % of reading
52 MECHANICAL- ACCELERATION AND SPEED
Tachometer - Non contact Type
Using Digital Tachometer, RPM source by Comparison method:
10 rpm to 100 rpm 3.5 % of reading
53 MECHANICAL- ACOUSTICS Sound Level meter
Using Sound level calibrator by direct method
114 dB @ 1 kHz 0.74 dB
54 MECHANICAL- ACOUSTICS Sound Level meter
Using Sound Level calibrator by Direct method
94 dB @ 1 kHz 0.74 dB
55 MECHANICAL- DENSITY AND VISCOSITY
Density Hydrometers , Lactometers
Using reference hydrometers & compatible liquids by comparison method as per IS 3104: 1982( RA-2018)
0.650 g/ml to 1.150 g/ml 0.0007 g/ml
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 11 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
56 MECHANICAL- DENSITY AND VISCOSITY
Density Hydrometers , Lactometers
Using reference hydrometers & compatible liquids by comparison method as per IS 3104: 1982( RA-2018)
1.150 g/ml to 2.000 g/ml 0.002 g/ml
57 MECHANICAL- DENSITY AND VISCOSITY
Viscosity Cup: Orifice Diameter : 1 to 6 mm
Using Viscosity Standard by Comparison Method
64.40 cSt to 330 cSt 2.1 %
58
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Angle Plate: Parallelism of opposite faces and edges
Using Surface plate , Master cylinder , Lever Dial , Height gauge , Jack By Comparison Method
Upto 450 mm 13.0 µm
59
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Air Gauge Unit ( L.C : 0.001 mm )
Using Setting Ring gauge by Comparison Method
+/- 100 µm 3.6 µm
60
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Air Ring Gauge Using Length measuring M/C - By Comparison Method
100 mm to 180 mm 1.6 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 12 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
61
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Air Ring Gauge Using Length measuring M/C - By Comparison Method
3 mm to 100 mm 1.5 µm
62
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Angle Plate - Flatness of working face
Using Surface plate , Master cylinder , Lever Dial , Height gauge , Jacks- By Comparison Method
Upto 450 mm 13.0 µm
63
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Angle Plate - Squareness of exterior faces over width
Using Surface plate , Master cylinder , Lever Dial , Height gauge , Jacks By Comparison Method
Upto 450 mm 13.0 µm
64
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Bench Center - Parallelism
Using Test Mandrel ( Taper / Straight) , Lever dial By Comparison Method
Upto 3000 mm 8.3 µm
65
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Bench Center - Run out
Using Test Mandrel ( Taper / Straight) , Lever dial By Comparison Method
Upto 3000 mm 8.3 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 13 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
66
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Bevel / Degree Protectors LC: 0.01°/ 5 minutes
Using Angle gauges set,Dial indicator, Height Gauge, Master Cylinder and surface plate- By Comparison Method
0 ° to 180 ° 0.42 minutes of arc
67
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Bore Gauges (2 Point) Transmission Accuracy Check) L.C:0.001 mm
Using Length measuring M/C- By Comparison Method
upto 2 mm 1.0 µm
68
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Box Angle Plate - Parallelism of opposite faces and edges
Using Surface plate , Master cylinder , Lever Dial , Height gauge , Jacks- By Comparison Method:
Upto 450 mm 13.0 µm
69
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Box Angle Plate - Squareness of adjacent faces over dimensions
Using Surface plate , Master cylinder , Lever Dial , Height gauge , Jack By Comparison Method:
Upto 450 mm 13.0 µm
70
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Box Angle Plate- Flatness of Working (Exterior) faces
Using Surface plate , Master cylinder , Lever Dial , Height gauge , Jacks By Comparison Method
upto 450 mm 13 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 14 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
71
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Caliper ( Vernier , Dial , Digital) L.C : 0.02 mm
Using Length Bar , Gauge Block(0- Grade) , Digital Micrometer - By Comparison Method
0 to 1800 mm 16.0 µm
72
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Caliper ( Vernier , Dial , Digital) L.C: 0.01 mm
Using Length Bar , Gauge Block(0- Grade) , Digital Micrometer By Comparison Method
0 to 1000 mm 8.8 µm
73
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Caliper ( Vernier , Dial , Digital) L.C: 0.01 mm
Using Caliper checker , Gauge Block(0-Grade) By Comparison Method
0 to 300 mm 8.4 µm
74
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Caliper ( Vernier , Dial , Digital) L.C: 0.01 mm
Using Caliper checker , Gauge Block(0-Grade) , Digital Micrometer - By Comparison Method
0 to 600 mm 7.4 µm
75
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Caliper ( Vernier , Dial , Digital) L.C: 0.02 mm
Using Length Bar , Gauge Block (0- Grade) , Digital Micrometer By Comparison Method
0 to 1000 mm 15.0 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 15 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
76
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Chamfer /Weld fillet / Hi-Lo / Bridge cam gauge - Angle
Using Profile projector by Comparison Method
1 ° to 90 ° 14 minute of Arc
77
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Chamfer /Weld fillet / Hi-Lo / Bridge cam gauge- Length
Using Profile projector by Comparison Method
0 to 60 mm 5.3 µm
78
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Coating Thickness gauge (L.C: 0.01 mm)
Using Coating /Master foils By Comparison Method
>0.8 mm to 10 mm 6.0 µm
79
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Coating Thickness Gauge L.C: 0.1 µm
Using Coating/ Master Foils by Comparison Method
10 µm to 0.8 mm 1.5 µm
80
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Combination set, Clinometer , Inclinometer L.C: 1°
Using Angle Gauges - By Comparison Method
0 ° to 180 ° 36 minutes of Arc
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 16 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
81
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Comparator Stand ( Granite & Cast Iron) -Flatness Deviation
Using Electronics level by Comparison Method:
150 mm x 150 mm to 300 mm to 300 mm
0.51 sqrt L+W /125 (L ,W is in mm)
82
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Cross Hach Tester Using Profile projector by direct method
0 to 2 mm 6.2 µm
83
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Cylindrical / Cube Mould
Using Digital caliper, Depth gauge by Comparison Method
20 mm to 300 mm 82.3 µm
84
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Cylindrical Setting Standard - Diameter
Using Length measuring M/C , Gauge Block By Comparison Method
0.5 mm to 150 mm 1.0 µm
85
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Cylindrical Setting Standard - Run out
Using Bench centre , Lever Dial By Comparison Method
0.5 mm to 200 mm 9.0 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 17 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
86
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Cylindrical Setting Standard- Diameter
Using Length measuring M/C , Setting Plug By Comparison Method
150 mm to 200 mm 2.3 µm
87
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Depth Micrometer L.C :0.001 mm
Using Gauge Blocks (0-Grade),Surface Plate - By Comparison Method
0 to 25 mm 2.2 µm
88
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Depth Micrometer L.C :0.001 mm
Using Gauge Blocks (0-Grade), Surface Plate By Comparison Method
0 to 150 mm 2.3 µm
89
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Caliper - External , L.C: 0.01 mm
Using Gauge Block (0- Garde) by Comparison Method
0 to 50 mm 7.05 µm
90
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial caliper- Internal , L.C : 0.01 mm
Using Digital Micrometer - By Comparison Method
10 mm to 150 mm 7.43 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 18 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
91
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Indicator ( Lever Type) L.C :0.001 mm
Using Length Measuring M/C - By Comparison Method
0 to 0.14 mm 0.9 µm
92
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Indicator ( Lever Type) L.C :0.002 mm
Using Length Measuring M/C - By Comparison Method
0 to 0.60 mm 0.9 µm
93
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Indicator ( Lever Type) L.C :0.01 mm
Using Length Measuring M/C - By Comparison Method
0 to 1.0 mm 1.4 µm
94
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Indicator ( Plunger type) L.C :0.01 mm
Using Length Measuring M/C - By Comparison Method
0 to 100 mm 1.7 µm
95
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Indicator ( Plunger) L.C :0.001 mm
Using Length Measuring M/C - By Comparison Method
0 to 50 mm 1.3 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 19 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
96
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Indicator ( Plunger) L.C :0.001 mm
Using Length Measuring M/C - By Comparison Method
0 to 25 mm 1.0 µm
97
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Thickness Gauge L.C: 0.01 mm
Using Gauge Blocks ( 0- Grade) by Comparison Method
0 to 50 mm 9.2 µm
98
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Thickness Gauge L.C: 0.1 mm
Using Gauge blocks ( 0-Garde) by Comparison Method
0 to 100 mm 11.6 µm
99
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Dial Thickness Gauge / Dial Caliper L.C: 0.001 mm
Using Gauge blocks ( 0-Garde) by Comparison Method
0 to 12 mm 0.8 µm
100
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Electronics Level L.C: 0.01 /0.001 mm/mtr
Using Robust Tilting Table , Electronics level by Comparison Method
upto 10 mm/mtr 8.7 µm/mtr
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 20 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
101
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Elongation gauge Using Digital caliper - By Comparison Method
0 mm to 100 mm 26 µm
102
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Engineer Square/ Cylindrical Square - Squareness
Using Surface plate , Master cylinder , Gauge Block ( 0- Grade)- By Comparison Method
upto 600 mm 9.7 µm
103
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
External Micrometer (Digital / Plain / Analog / Groove) L.C :0.01 mm
Using Length Bar , Gauge Blocks (0- Grade) , Optical flat, set of 4 Optical Parallels - By Comparison Method
150 mm to 1000 mm 11.5 µm
104
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
External Micrometer (Digital/ Plain/ Analog/ Groove) L.C :0.01 mm
Using Length Bar , Gauge Blocks (0- Grade) , Optical flat, set of 4 Parallels - By Comparison Method
1000 mm to 1800 mm 26.0 µm
105
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
External Micrometer (Digital/ Plain/ Analog/ Blade/ Pitch/ Pointed Flange/ Groove) L.C :0.001 mm
Using Gauge Blocks (0-Grade) , Optical flat, Set of Optical Parallels by Comparison Method
0 to 150 mm 1.8 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 21 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
106
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
External Micrometer (Digital/ Plain/ Analog/ Blade/ Pitch/ Pointed Flange/ Groove) L.C :0.001 mm / 0.0001 mm
Using Gauge Blocks (0-Grade) , Optical flat, set of 4 Optical Parallels - By Comparison Method
0 to 25 mm 1.3 µm
107
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Feeler gauge/ Coating Foils
Using Length measuring M/C- By Comparison Method
Up to 10 mm 1.3 µm
108
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Flakiness gauge Using Digital caliper - By Comparison Method
0 to 100 mm 30.5 µm
109
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Hegman Gauge , Step Gauge L.C: 0.01 mm
Using Electronics Probe , Surface plate by Comparison Method
Upto 100 µm 2.3 µm
110
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Height Gauge ( Vernier , Dial , Digital) L.C : 0.01 mm
Using Caliper checker , Surface plate , Lever Dial - By Comparison Method
0 to 300 mm 7.9 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 22 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
111
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Height Gauge ( Vernier , Dial , Digital) L.C: 0.01 mm
Using Caliper checker , Surface plate , Lever Dial by Comparison Method
0 to 600 mm 7.7 µm
112
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Height Gauge ( Vernier , Dial , Digital) L.C: 0.01 mm / 0.02 mm
Using Length bar , Surface plate , Lever Dial by Comparison Method
0 to 1000 mm 14.0 µm
113
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Height Master ( Pitch Block Accuracy) , L.C : 0.001 mm
Using Linear height 2d , Surface plate , Gauge block (0- Grade) By Comparison Method
0 to 600 mm 7.9 µm
114
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Holtest /Three Point Internal Micrometer L.C: 0.001 mm
Using set of Ring gauges By Comparison Method
2 mm to 100 mm 2.1 µm
115
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Internal / Stick Micrometer L.C :0.001 mm / 0.01 mm
Using Guage blocks (0-Grade) with accessary, Caliper checker by Comparison Method
5 mm to 50 mm 8.8 mm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 23 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
116
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Internal /Stick Micrometer L.C :0.001 mm
Using Gauge block with accessories, Caliper checker by Comparison Method
50 mm to 500 mm 7.8 µm
117
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Measuring Pins Using Length measuring M/C by Comparison Method
0.1 mm to 20 mm 0.8 µm
118
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Metric Steel scales , LC :1 mm
Using Scale & Tape calibration unit by Comparison Method
0 to 2000 mm 133 sqrt L/1000 µm (Where L is in mm)
119
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Metric Steels/ Woven Metallic / Fiber Tapes , L.C :1 mm
Using Scale & Tape calibration unit By Comparison Method
0 to 50 meter 133 sqrt L/1000 µm ( Where L is in mm)
120
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Micrometer Head L.C :0.001 mm
Using Length measuring machine - By Comparison Method
0 to 50 mm 1.0 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 24 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
121
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Microscope L.C: 0.1/0.01 mm
Using Glass scale by Comparison Method 0 to 1 mm 7.9 µm
122
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Pie Tape L.C:1 mm Using Scale & Tape calibration unit by Comparison Method
15 mm to 6000 mm 155 L / 1000 µm (L is in mm)
123
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain Ring Gauge( Setting /Master)
Using Length Measuring M/C by Comparison Method
100 mm to 180 mm 1.6 µm
124
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain Ring Gauge( Setting /Master)
Using Length Measuring M/C by Comparison Method
3 mm to 100 mm 1.5 µm
125
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain Plug Gauge Using Length Measuring M/C - By Comparison Method
1 mm to 100 mm 1.1 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 25 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
126
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain Plug Gauge Using Length Measuring M/C - By Comparison Method
100 mm to 150 mm 1.6 µm
127
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain Plug Gauge Using Length Measuring M/C - By Comparison Method
150 mm to 270 mm 2.8 µm
128
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain/ Magnetic V Block ( Flatness )
Using Surface plate , Lever dial , Test Mandrels , Cylindrical Work piece, Height gauge for Holding -By Comparison Method
Upto 200 mm 4.6 µm
129
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain/ Magnetic V Block ( Parallelism )
Using Surface plate , Lever dial , Test Mandrels , Cylindrical Work piece, Height gauge for Holding- By Comparison Method
Upto 200 mm 4.6 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 26 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
130
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Plain/ Magnetic V Block- Perpendicularity
Using Surface plate , Lever dial , Test Mandrels , Cylindrical Work piece, Height gauge for Holding By Comparison Method
Upto to 200 mm 4.6 µm
131
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Profile / Form / PCD gauges (Linear Dim.)
Using Profile Projector - By Comparison Method
Upto 200 mm 5.8 µm
132
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Profile / Form / PCD Gauges ( Angle )
Using Profile Projector By Comparison Method
Upto 360 ° 12.6 second of Arc
133
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Radius Gauge Using Profile Projector By Comparison Method
0.6 mm to 100 mm 5.4 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 27 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
134
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Sine Bar -Angular Measuremnets
Using Angle Gauges , Electronics Probe, Lever dial , Surface plate , Height gauge, Gauge Block( 0- Grade) - By Comparison Method
upto 300 mm 3.3 Second of Arc
135
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Snap Gauge Using Length Measuring M/C- By Comparison Method
100 mm to 180 mm 1.3 µm
136
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Snap Gauge Using Length measuring M/C - By Comparison Method
3 mm to 100 mm 1.2 µm
137
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Spirit Level LC: 0.02 mm/mtr
Using Robust Tilting Table , Electronics level , Dial indicator( lever) , Height gauge, surface plate - By Comparison Method
Upto 300 mm (Base length) mm 7.9 µm/mtr
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 28 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
138
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Step gauge Using 2 D height gauge - By Comparison Method
0.5 mm to 100 mm 6.0 µm
139
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Surface Plate ( Granite & Cast Iron)- Flatness Deviation
Using Electronics level by Comparison Method
450 mm 450 mm to 6000 mm X 6000 mm
0.51 sqrt L+W /125 µm (L ,W is in mm)
140
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Test Sieves - Aperture size
Using Profile projector - By Comparison Method
0.02 mm to 4.0 mm 3.8 µm
141
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Test Sieves - Aperture size
Using Digital caliper - By Comparison Method
4.0 mm to 125 mm 23.0 µm
142
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Thread Pitch Gauge / Micrometer- Pitch accuracy
Using Profile Projector by Comparison Method
0.25 mm to 6.0 mm 2.80 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 29 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
143
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Thread Pitch Gauge/ Micrometer- Flank Angle
Using Profile Projector by Comparison Method
upto 60 ° 0.2 min.of Arc
144
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Thread Plug/ WCP Gauge- Effective Diameter
Using Length measuring M/C, Three wire pin set By Comparison Method
1 mm to 100 mm 2 µm
145
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Thread plug/ WCP Gauge-Effective Diameter
Using Length measuring M/C, Three wire pin set By Comparison Method
100 mm to 180 mm 2.95 µm
146
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Thread Ring/ Wear checking Ring Gauge-Effective Dia.
Using Length measuring M/C.- By Comparison Method
3 mm to 100 mm 1.86 µm
147
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Ultrasonic Thickness Gauge LC : 0.1 mm
Using Gauge Block- 0-Grade - By Comparison Method
1.2 mm to 100 mm 70.4 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 30 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
148
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Vernier Depth Gauge LC:0.01 mm
Using Length Bar Grade -0 Gauge Block ,Lever dial Surface plate , Holding fixture- By Comparison Method
0 to 200 mm 9.2 µm
149
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Vicat test apparatus Plunger diameter (Needle)
Using Digital Micrometer by Comparison Method
0.5 mm to 10 mm 7.4 µm
150
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Wire gauge Using Profile projector By Comparison Method
0.19 mm to 7.82 mm 7.0 µm
151 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Caliper Checker / Check Master
Using Length Bar, Linear height 2D, Surface Plate By comparison method .
0 to 600 mm 3.8 µm
152 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Dial calibration Tester LC:0.001 mm
Using Electronics Probe , Gauge Block (0-Grade) ,By comparison method .
0 to 25 mm 1.2 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 31 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
153 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Electronics /LVDT Probe LC: 0.01/0.1 micron
Using Gauge Block, Slip Gauges ( 0- Grade) . Surface Plate ,By comparison method .
0 to 25 mm 1.2 µm
154 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Electronics- 2 D Height Gauge (L.C: 0.0001 mm) (Linear, Squareness)
Using Length Bar, Gauge Block ( 0 Grade) , Surface plate, Master Cylinder by Comparison Method
0 to 600 mm 4.9 µm
155 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Gauge Block Accessories - Flatness
Using Optical Flat, Surface Plate , Electronics probe ,By comparison method .
Upto 250 mm 0.3 µm
156 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Gauge Block Accessories - Parallelism
Using Optical Flat, Surface Plate , Electronics probe ,By comparison method .
Upto 250 mm 2.6 µm
157 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Gauge Block- Slip gauges
Using Gauge Block set (K-Grade)& Gauge Block Calibrator ,By comparison method .
0.5 mm to 10 mm 0.10 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 32 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
158 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Gauge Block- Slip gauges
Using Gauge Block set (K-Grade)& Gauge Block Calibrator ,By comparison method .
25 mm to 50 mm 0.20 µm
159 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Gauge Block- Slip gauges
Using Gauge Block set (K-Grade)& Gauge Block Calibrator,By comparison method .
50 mm to 100 mm 0.37 µm
160 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Gauge Blocks- Slip gauges
Using Gauge Block set (K-Grade)& Gauge Block Calibrator ,By comparison method .
10 mm to 25 mm 0.13 µm
161 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Micrometer Setting Rod /Length Bar
Using Length Measuring M/C, 0- Grade slip gauges , Setting Plug,Comparison Method
100 mm to 200 mm 2.3 µm
162 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Micrometer Setting Rod /Length Bar
Using Length Bar ,Electronics Probe with Comparator stand
200 mm to 500 mm 3.0 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 33 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
163 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Micrometer Setting Rod /Length Bar
Using Length Measuring M/C ,Comparison Method
25 mm to 100 mm 1.0 µm
164 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Micrometer Setting Rod /Length Bar
Using Length Bar ,Electronics Probe with Comparator stand
500 mm to 1000 mm 4.0 µm
165 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Optical Flat Type A - Flatness
Using Master Optical Flat, Monochromatic light source ,By comparison method .
UPTO 50 mm 0.10 µm
166 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Optical Parallel - Flatness
Using Master Flat, Monochromatic light source , Two Probe comparator,By comparison method .
Upto 50 mm 0.10 µm
167 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Optical Parallel - Parallelsim
Using Master Flat, Monochromatic light source , Two Probe comparator, By comparison method .
Upto to 50 mm 0.10 µm
168 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Profile Projector - Angle , L.C: 1 Second
Using Angle gauges by comparison method .
0 ° to 360 ° 3.1 Second
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 34 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
169 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Profile Projector - Linear . LC:0.001 mm
Using Glass scale ,By comparison method .
0 to 200 mm 2.2 µm
170 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Profile Projector - Magnification
Using Gauge Block (0-Grade) , Digital Caliper ,By comparison method .
10 X to 100 X 0.12 %
171 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Spline Plug . Ring Gauge - Diameter over pin
Using Length measuring M/C+Measuring Pins ,By comparison method .
10 mm to 100 mm 2.10 µm
172 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Surface Roughness Tester(Portable) ( Ra )
Using Roughness Master ,By comparison method .
Ra-0.4 ,3.20 µm 0.42 µm
173 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Universal / Length measuring M/C , L.C: 0.1 µm
Using Gauge Block (K- Grade) ,By comparison method .
0 to 100 mm 0.33 µm
174 MECHANICAL- DUROMETER
Shore Rubber Hardness Tester (Type A, D, 00 )
Using Rubber Hardness Calibrator (Fitted with Load cell with Indicator, / Spring Force Measurement method as per ASTM D 2240- 05
0 to 100 Shore 0.40 Shore
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 35 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
175 MECHANICAL- MOBILE FORCE MEASURING SYSTEM
Push Pull gauge/ Force gauge (In Push Pull mode)
Using Dead weight and loading hangers as per VDI/VDE-2624 : DEC-2008
20 N to 1000 N 1 N
176 MECHANICAL- PRESSURE INDICATING DEVICES
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers
Using Digital Pressure Gauge , Hydraulic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 1000 bar 1.78 bar
177 MECHANICAL- PRESSURE INDICATING DEVICES
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers
Using Digital Pressure Gauge , Hydraulic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 200 bar 0.8 bar
178 MECHANICAL- PRESSURE INDICATING DEVICES
Negative Pressure - Vacuum gauges
Using Digital pressure gauge, Vacuum pump By Comparison method as per DKDR6-1
(-) 0.8 bar to 0 0.008 bar
179 MECHANICAL- PRESSURE INDICATING DEVICES
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers
Using Digital Pressure Gauge , Pneumatic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 30 bar 0.03 bar
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 36 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
180 MECHANICAL- PRESSURE INDICATING DEVICES
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers/ Magnehelic gauge/ Manometers
Using Digital manometer , Pneumatic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 0.34 bar 0.006 bar
181 MECHANICAL- PRESSURE INDICATING DEVICES
Pressure calibrator , Analog & Digital pressure gauges , Pressure Transducers, Transmitters - Medium Hydraulic
Using Dead weight Tester based , 6 ½ Digital Multimeter by Direct Method on DKD R6-1
6 bar to 600 bar 0.09 %rdg
182 MECHANICAL- TORQUE GENERATING DEVICES
Torque Wrench Type 1 , Class B, C, D, E & Type 2, Class A, B, D, E
Using Torque transducers and indicator , Digital torque wrench calibration system as per IS/ISO 6789:2017
1 Nm to 10 Nm 1.4 %
183 MECHANICAL- TORQUE GENERATING DEVICES
Torque Wrench Type 1, Class B, C, D, E & Type 2, Class A, B, D, E
Using Torque transducers and indicator , Digital torque wrench calibration system as per IS/ISO 6789:2017
10 Nm to 1000 Nm 1.86 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 37 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
184 MECHANICAL- TORQUE MEASURING DEVICES
Torque Calibrator/ Torque Transducers/ Torque meter / Torque Tester , Class 0.5 and coarser
Using Dead weight torque calibration system consisting of lever arm and Dead weight as per BS-7882:2017
200 Nm to 1000 Nm 0.12 %
185 MECHANICAL- TORQUE MEASURING DEVICES
Torque Calibrator/Torque Transducers/Torque meter /Torque Tester , Class 0.5 and coarser
Using Dead weight torque calibration system consisting of lever arm and Dead weight as per BS-7882:2017
10 Nm to 50 Nm 0.15 %
186 MECHANICAL- TORQUE MEASURING DEVICES
Torque Calibrator/Torque Transducers/Torque meter /Torque Tester , Class 0.5 and coarser
Using Dead weight torque calibration system consisting of lever arm and Dead weight as per BS-7882:2017
2 Nm to 10 Nm 0.10 %
187 MECHANICAL- TORQUE MEASURING DEVICES
Torque Calibrator/Torque Transducers/Torque meter /Torque Tester , Class 0.5 and coarser
Using Dead weight torque calibration system consisting of lever arm and Dead weight as per BS-7882:2017
50 Nm to 200 Nm 0.10 %
188 MECHANICAL- TORQUE MEASURING DEVICES
Torque Calibrator/Torque Transducers/Torque meter /Torque Tester , Class 1.0 and coarser
Using Dead weight torque calibration system consisting lever arm(Torque calibration Disc), As pert BS 7882:2017
0.2 Nm to 2 Nm 0.96 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 38 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
189 MECHANICAL- VOLUME
Glass ware (Pipettes/ Burette/ Measuring cylinder/ Volumetric flask/ Beaker/ Jar/ Conical flask)
Using Weighing balance of (L.C: 0.1 mg) and distilled water of known density by Gravimetric Method as per ISO 4787: 2021
10 ml to 100 ml 7 µl
190 MECHANICAL- VOLUME
Glass ware (Pipettes/ Burette/Measuring cylinder/Volumetric flask/ Beaker/Jar/Conical flask)
Using Weighing balance of (L.C: 0.01 mg) and distilled water of known density by Gravimetric Method as per ISO 4787 : 2021
1 ml to 10 ml 0.8 µl
191 MECHANICAL- VOLUME
Glass ware (Pipettes/ Burette/Measuring cylinder/Volumetric flask/ Beaker/Jar/Conical flask)
Using Weighing balance of LC=1mg and distilled water of known density as per ISO 4787 ;2021,Gravimetric Method
100 ml to 500 ml 8 µl
192 MECHANICAL- VOLUME
Glass ware (Pipettes/ Burette/Measuring cylinder/Volumetric flask/ Beaker/Jar/Conical flask)
Using Weighing balance of LC=10mg and distilled water of known density as per ISO 4787 ;2021,Gravimetric Method
500 ml to 1000 ml 0.03 ml
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 39 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
193 MECHANICAL- VOLUME Micro-Pipettes
Using weighing balance (L.C:0.01 mg) and distilled water of known density by Gravimetric Method as per ISO 8655-6-1: 2022
100 µl to 1000 µl 0.7 µl
194 MECHANICAL- VOLUME Micro-Pipettes
Using weighing balance (L.C: 0.01 mg) and distilled water of known density by Gravimetric Method as per ISO 8655-6-1: 2022
1000 µl to 5000 µl 1.18 µl
195 MECHANICAL- WEIGHING SCALE AND BALANCE
Spring Balance (Class IIII) Readability:10 g & Coarser
Using F1& M1 class weights as per IS 16514 part 1 and part 2
0 to 50 kg 8 g
196 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class I ), Readability: 1 mg & Coarser
Using Standard weights F1 class as per OIML R 76-I
0 to 1000 g 6.7 mg
197 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class II) Readability: 10mg & Coarser
Using Standard weights F1 class as per OIML R76 -1
0 to 1200 g 10.6 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 40 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
198 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class I) Readability:0.1 mg & Coarser
Using Standard weights E1 class (1 mg to 200 g) as per OIML R-76 -1
42 g to 200 g 0.1 mg
199 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class I) Readability: 0.001 mg & Coarser
Using Standard weights E1 class (1 mg to 200 g) as per OIML R-76-1
1 mg to 42 g 0.02 mg
200 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class II) Readability: 0.1 g & Coarser
Using Standard weights F1 class as per OIML R-76-1
0 to 15 kg 0.11 g
201 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class II) Readability: 10 mg & Coarser
Using Standard weights of F1 class as per OIML R76 -1
0 to 3200 g 11.7 mg
202 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class III) Readability: 1 g & Coarser
Using Standard weights F1 class as per OIML R76 -1
0 to 50 kg 0.9 g
203 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class IIII) Readability: 20 g & Coarser
Using Standard weights F1 , M1 class as per OIML R 76-1
0 to 200 kg 175 g
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 41 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
204 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of class F1, weighing balance with (L.C: 10 mg ) By Substitution method as per OIML R-111:2004
1 kg 1.1 mg
205 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of F1 class & weighing balance of (L.C: 0.001 g) by Substitution method as per OIML R-111:2004
500 g 1 mg
206 MECHANICAL- WEIGHTS
Weight of M1 class and coarser
Using standard weights of class F1, weighing balance with (L.C: 0.1 g) by Substitution method as per OIML R-111:2004
10 kg 100 mg
207 MECHANICAL- WEIGHTS
Weight of M1 Class and coarser
Using standard weights of class F1, weighing balance with (L.C: 0.1 g) by Substitution method as per OIML R-111:2004
5 kg 70.65 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 42 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
208 MECHANICAL- WEIGHTS
Weight of F1 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) by Substitution method as per OIML R-111:2004.
10 g 0.04 mg
209 MECHANICAL- WEIGHTS
Weight of F1 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.1 mg) by Substitution method as per OIML R-111:2004
100 g 0.1 mg
210 MECHANICAL- WEIGHTS
Weight of F1 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) by Substitution method as per OIML R-111:2004.,
2 g 0.04 mg
211 MECHANICAL- WEIGHTS
Weight of F1 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) By Substitution method as per OIML R-111:2004
20 g 0.05 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 43 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
212 MECHANICAL- WEIGHTS
Weight of F1 class and coarser
Using standard weights of E1 class & weighing balance (L.C: 0.1 mg) by Substitution method as per OIML R-111:2004
200 g 0.3 mg
213 MECHANICAL- WEIGHTS
Weight of F1 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.1 mg ) by Substitution method as per OIML R-111:2004
50 g 0.14 mg
214 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) By Substitution method as per OIML R-111:2004
1 g 0.04 mg
215 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) by Substitution method as per OIML R-111:2004
1 mg 0.03 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 44 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
216 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) by Substitution method as per OIML R-111:2004
10 mg 0.03 mg
217 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) By Substitution method as per OIML R-111:2004
100 mg 0.03 mg
218 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) By Substitution method as per OIML R-111:2004
2 mg 0.03 mg
219 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) by Substitution method as per OIML R-111:2004.
20 mg 0.03 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 45 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
220 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C:0.01 mg) by Substitution method as per OIML R-111:2004.
200 mg 0.01 mg
221 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) by Substitution method as per OIML R-111:2004
5 g 0.04 mg
222 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg).by Substitution method as per OIML R-111:2004
5 mg 0.03 mg
223 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) By Substitution method as per OIML R-111:2004
50 mg 0.03 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 46 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
224 MECHANICAL- WEIGHTS
Weight of F2 class and coarser
Using standard weights of E1 class & weighing balance of (L.C: 0.01 mg) By Substitution method as per OIML R-111:2004
500 mg 0.04 mg
225 MECHANICAL- WEIGHTS
Weight of M1 class and coarser
Using standard weights of F1 class & weighing balance of (L.C: 0.01 g) by Substitution method as per OIML R-111:2004
2 kg 20 mg
226 MECHANICAL- WEIGHTS
Weights Class M1 and coarser
Using standard weights of class F1, weighing balance with (L.C: 1 g) By Substitution method as per OIML R-111:2004
20 kg 0.9 g
227 MECHANICAL- WEIGHTS
Weights Class M3 and coarser
Using standard weights of class F1, weighing balance with (L.C: 1 g) By Substitution method as per OIML R-111:2004
50 kg 0.9 g
228 OPTICAL- OPTICAL LUX/LIGHT METER Illuminance/ /Lux
meter 1 lx to 20000 lx 7.5 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 47 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
229 THERMAL- SPECIFIC HEAT & HUMIDITY
Humidity controller/ Indicator with sensor/ Thermo Hygrometer
Using Temp.& Humidity meter with sensor & Humidity chamber by comparison method
25 % rh to 90 % rh @ 25 °C 2.45 % rh
230 THERMAL- SPECIFIC HEAT & HUMIDITY
Indicator with sensor of Humidity Chamber/ Environmental Chamber (Single Position)
Using Temp.& Humidity meter with sensor by comparison method
25 % rh to 90 % rh @ 25 °C 2.1 % rh
231 THERMAL- SPECIFIC HEAT & HUMIDITY
Temperature of Humidity controller/ Indicator with sensor/ Thermo Hygrometer
Using Temp & Humidity meter with sensor & Humidity Chamber by Comparison method
10 °C to 50 °C @ 50 % rh 1.32 °C
232 THERMAL- TEMPERATURE
Indicator with sensor of Environment Chamber, Furnaces, Freezers, Oven, Vacuum Oven, BOD Incubator, Incubator, Centrifuge Chamber, Cold Room, Hot Room, Autoclave, Aging Oven, Dry block , Muffle Furnace (Single Position)
Using Simplex , 4 Wire RTD sensor with indicator By comparison method
(-) 80 °C to 400 °C 0.5 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 48 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
233 THERMAL- TEMPERATURE
Indicator with sensor of Oven , Vacuum oven , Hot chamber ,Dry block Furnace / Muffle / Industrial Furnace (Single Position)
Using R Type Thermocouple with Indicator By comparison method
>400 °C to 1200 °C 3.80 °C
234 THERMAL- TEMPERATURE
Infrared Temperature Indicator / Thermal imager (Temperature only) / Pyrometer (emissivity 0.95)
Using with IR Thermometer and black body source with emissivity (0.95) By comparison method
> 50 °C to 500 °C 2.27 °C
235 THERMAL- TEMPERATURE
Infrared Temperature Indicator/ Thermal imager (Temperature Only)/ Pyrometer (emissivity 0.95)
Using with IR Thermometer and black body source with emissivity (0.95) By comparison method
10 °C to 50 °C 2.28 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 49 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
236 THERMAL- TEMPERATURE
RTD / Thermocouples With or without Controller / Indicator/ Data Logger / Recorder, Temperature Transmitter, Temperature Gauge, Liquid in Glass Thermometer, Digital Thermometer
Using Temp. indicator with RTD (Pt 100) sensor , Oil bath, 6 ½ Digital Multimeter By Comparison Method
> 50 °C to 170 °C 2.11 °C
237 THERMAL- TEMPERATURE
RTD/ Thermocouples With or without Controller / Indicator/ Data Logger / Recorder, Temperature Transmitter, Temperature Gauge, Liquid in Glass Thermometer, Digital Thermometer
Using Simplex 4 wire RTD with indicator- PT-100, liquid bath, 6 ½ Digital Multimeter By comparison method
(-) 30 °C to 50 °C 0.4 °C
238 THERMAL- TEMPERATURE
Thermocouples With or without Controller / Indicator / Data Logger / Recorder, Temperature Transmitter, Temperature Gauge, Digital Thermometer
Using Iindicator with with R Type sensor, Dry Block Furnace, 6 ½ Digital Multimeter By Comparison Method
> 200 °C to 500 °C 3.3 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 50 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
239 THERMAL- TEMPERATURE
Thermocouples With or without Controller / Indicator/ Data Logger / Recorder, Temperature Transmitter, Temperature Gauge
Using Temp. sensor with indicator R type, Dry block furnace, 6 ½ Digital Multimeter By comparison method
> 500 °C to 1200 °C 3.8 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 51 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
Site Facility
1
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Measure)
AC High Voltage @ 50 Hz
Using High voltage probe with DMM by Direct Method
1 kV to 28 kV 5.80 %
2
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Measure)
Active Energy, 1 Phase 2 wire @ 50 Hz , 240 V, 0.1 A to 10 A, UPF
Using Single /Three phase engry Meter by Direct Method
24 Wh to 2.0 kWh 0.30 %
3
ELECTRO- TECHNICAL- Alternating Current (< 1 GHz) (Measure)
Active Energy, 3 Phase 4 wire @ 50 Hz , 240 V, 0.1 A to 100 A, UPF
Using Single /Three phase engry Meter by Direct Method:
72 Wh to 2.0 kWh 0.65 %
4
ELECTRO- TECHNICAL- DIRECT CURRENT (Measure)
DC High Voltage Using High voltage probe with DMM by Direct Method
1 kV to 10 kV 4.43 %
5
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
J-Type Thermocouple
Using Process calibrator by direct method
(-) 200 °C to 500 °C 1.50 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 52 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
6
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
K Type Thermocouple
Using Process calibrator by Direct method
(-) 200 °C to 1200 °C 1.50 °C
7
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
R Type Thermocouple
Using Process calibrator by Direct method
200 °C to 1600 °C 1.86 °C
8
ELECTRO- TECHNICAL- TEMPERATURE SIMULATION (Source)
RTD ( PT-100 )Type Using Process calibratior by Direct method
(-) 200 °C to 795 °C 1.50 °C
9
ELECTRO- TECHNICAL- TIME & FREQUENCY (Measure)
Time Using Time interval calibrator by Comparison Method
1 s to 80000 s 4.3 % to 0.03 %
10 FLUID FLOW- FLOW MEASURING DEVICES
Liquid (water) volume flow rate measuring devices
Using hand held ultrasonic flow meter by comparison method
1.2 m3/hr to 735 m3/hr 2.0 %rdg.
11
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Bench Center - Parallelism
Using Test Mandrel ( Taper / Straight) , Lever dial By Comparison Method
Upto 3000 mm 8.3 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 53 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
12
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Bench Center - Run out
Using Test Mandrel ( Taper / Straight) , Lever dial By Comparison Method
Upto 3000 mm 8.3 µm
13
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Comparator Stand ( Granite & Cast Iron) -Flatness Deviation
Using Electronics level by Comparison Method:
150 mm x 150 mm to 300 mm to 300 mm
0.51 sqrt L+W /125 (L ,W is in mm)
14
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Height Gauge ( Vernier , Dial , Digital) L.C: 0.01 mm / 0.02 mm
Using Length bar , Surface plate , Lever Dial by Comparison Method
0 to 1000 mm 14.0 µm
15
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Microscope L.C: 0.1/0.01 mm
Using Glass scale by Comparison Method 0 to 1 mm 7.9 µm
16
MECHANICAL- DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)
Surface Plate ( Granite & Cast Iron)- Flatness Deviation
Using Electronics level by Comparison Method
450 mm 450 mm to 6000 mm X 6000 mm
0.51 sqrt L+W /125 µm (L ,W is in mm)
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 54 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
17 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Electronics /LVDT Probe LC: 0.01/0.1 micron
Using Gauge Block, Slip Gauges ( 0- Grade) . Surface Plate ,By comparison method .
0 to 25 mm 1.2 µm
18 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Electronics- 2 D Height Gauge (L.C: 0.0001 mm) (Linear, Squareness)
Using Length Bar, Gauge Block ( 0 Grade) , Surface plate, Master Cylinder by Comparison Method
0 to 600 mm 4.9 µm
19 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Profile Projector - Angle , L.C: 1 Second
Using Angle gauges by comparison method .
0 ° to 360 ° 3.1 Second
20 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Profile Projector - Linear . LC:0.001 mm
Using Glass scale ,By comparison method .
0 to 200 mm 2.2 µm
21 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Profile Projector - Magnification
Using Gauge Block (0-Grade) , Digital Caliper ,By comparison method .
10 X to 100 X 0.12 %
22 MECHANICAL- DIMENSION (PRECISION INSTRUMENTS)
Universal / Length measuring M/C , L.C: 0.1 µm
Using Gauge Block (K- Grade) ,By comparison method .
0 to 100 mm 0.33 µm
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 55 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
23 MECHANICAL- HARDNESS TESTING MACHINES
Rockwell Hardness Tester
Using Standard Hardness Block by Indirect method as per IS 1586 PART 1 to 3 : 2018
HRA 1.0 HRA
24 MECHANICAL- HARDNESS TESTING MACHINES
Rockwell Hardness Tester
Using Standard Hardness Block by Indirect method as per IS 1586 PART 1 to 3 : 2018
HRBW 1.7 HRBW
25 MECHANICAL- HARDNESS TESTING MACHINES
Rockwell Hardness Tester
Standard Hardness Block/ Indirect method as per IS 1586 PART 1 to 3 : 2018
HRC 1.0 HRC
26 MECHANICAL- HARDNESS TESTING MACHINES
Verification of Brinell Hardness Tester
Using Standard Hardness Block by direct method as per IS 1500 (Part 1 to 4) :2019 & 2021
HBW 10 / 3000 2.3 %
27 MECHANICAL- HARDNESS TESTING MACHINES
Verification of Vickers Hardness Tester -HV 5
Using Standard Hardness Block / In direct method , As per IS 1501 (Part 1 to 4) :2020
HV-5 2.67 %
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 56 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
28 MECHANICAL- PRESSURE INDICATING DEVICES
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers
Using Digital Pressure Gauge , Hydraulic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 1000 bar 1.78 bar
29 MECHANICAL- PRESSURE INDICATING DEVICES
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers
Using Digital Pressure Gauge , Hydraulic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 200 bar 0.8 bar
30 MECHANICAL- PRESSURE INDICATING DEVICES
Negative Pressure - Vacuum gauges
Using Digital pressure gauge, Vacuum pump By Comparison method as per DKDR6-1
(-) 0.8 bar to 0 0.008 bar
31 MECHANICAL- PRESSURE INDICATING DEVICES
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers
Using Digital Pressure Gauge , Pneumatic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 30 bar 0.03 bar
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 57 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
32 MECHANICAL- PRESSURE INDICATING DEVICES
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers/ Magnehelic gauge/ Manometers
Using Digital manometer , Pneumatic comparator, 6 ½ Digital Multimeter by comparison method as per DKDR6-1
0 to 0.34 bar 0.006 bar
33
MECHANICAL- UTM, TENSION CREEP AND TORSION TESTING MACHINE
Uniaxial Static Testing M/C - Compression Mode
Using Force proving instruments . Load cell as per IS 1828 (Part 1):2022 & IS 1828 (Part 2):2015
1 kN to 2000 kN 0.77 %
34
MECHANICAL- UTM, TENSION CREEP AND TORSION TESTING MACHINE
Uniaxial Static Testing M/C -Tension Mode
Using Load cell as per IS 1828 (Part 1):2022 & IS 1828 (Part 2):2015
10 N to 50 kN 0.82 %
35 MECHANICAL- WEIGHING SCALE AND BALANCE
Spring Balance (Class IIII) Readability:10 g & Coarser
Using F1& M1 class weights as per IS 16514 part 1 and part 2
0 to 50 kg 8 g
36 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class I ), Readability: 1 mg & Coarser
Using Standard weights F1 class as per OIML R 76-I
0 to 1000 g 6.7 mg
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 58 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
37 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class II) Readability: 10mg & Coarser
Using Standard weights F1 class as per OIML R76 -1
0 to 1200 g 10.6 mg
38 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class I) Readability:0.1 mg & Coarser
Using Standard weights E1 class (1 mg to 200 g) as per OIML R-76 -1
42 g to 200 g 0.1 mg
39 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class I) Readability: 0.001 mg & Coarser
Using Standard weights E1 class (1 mg to 200 g) as per OIML R-76-1
1 mg to 42 g 0.02 mg
40 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class II) Readability: 0.1 g & Coarser
Using Standard weights F1 class as per OIML R-76-1
0 to 15 kg 0.11 g
41 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class II) Readability: 10 mg & Coarser
Using Standard weights of F1 class as per OIML R76 -1
0 to 3200 g 11.7 mg
42 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class III) Readability: 1 g & Coarser
Using Standard weights F1 class as per OIML R76 -1
0 to 50 kg 0.9 g
43 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Balances (Class IIII) Readability: 20 g & Coarser
Using Standard weights F1 , M1 class as per OIML R 76-1
0 to 200 kg 175 g
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 59 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
44 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Scale (Class IIII) Readability:50 g & Coarser
Using Cast iron weight by comparison method
>20 kg to 1500 kg 400 g
45 MECHANICAL- WEIGHING SCALE AND BALANCE
Weighing Scale (Class III ) Readability:1g & Coarser
Using Standard weight by comparison method
200 g to 6 kg 1.2 g
46 THERMAL- SPECIFIC HEAT & HUMIDITY
Indicator with sensor of Humidity Chamber/ Environmental Chamber (Single Position)
Using Temp.& Humidity meter with sensor by comparison method
25 % rh to 90 % rh @ 25 °C 2.1 % rh
47 THERMAL- TEMPERATURE
Dry Block Furnace/ Muffle Furnace/ Industrial Furnace – ( Multi position calibration)
Using Data logger with N-Type Thermocouple (minimum 9 sensor) By multi position method.
> 600 °C to 1200 °C 5.5 °C
48 THERMAL- TEMPERATURE
Dry Block Furnace/ Muffle Furnace/ Industrial Furnace ( Multi position calibration)
Using Data logger with N-Type Thermocouple (minimum 9 sensor) By multi position method.
300 °C to 600 °C 5 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 60 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
49 THERMAL- TEMPERATURE
Environment Chamber, Furnaces, Freezers, Oven, Vacuum Oven, BOD Incubator (Industrail Purpose only), Incubator (Industrail Purpose only), Centrifuge Chamber, Cold Room, Hot Room, Autoclave (Industrail Purpose only), Aging Oven (Multi Position Calibration)
Using Data logger with RTD sensor (minimum 9 sensor) By multi position method.
(-) 30 °C to 300 °C 1.1 °C
50 THERMAL- TEMPERATURE
Indicator with sensor of Environment Chamber, Furnaces, Freezers, Oven, Vacuum Oven, BOD Incubator, Incubator, Centrifuge Chamber, Cold Room, Hot Room, Autoclave, Aging Oven, Dry block , Muffle Furnace (Single Position)
Using Simplex , 4 Wire RTD sensor with indicator By comparison method
(-) 80 °C to 400 °C 0.5 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 61 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
51 THERMAL- TEMPERATURE
Indicator with sensor of Oven , Vacuum oven , Hot chamber ,Dry block Furnace / Muffle / Industrial Furnace (Single Position)
Using R Type Thermocouple with Indicator By comparison method
>400 °C to 1200 °C 3.80 °C
52 THERMAL- TEMPERATURE
RTD / Thermocouples With or without Controller / Indicator/ Data Logger / Recorder, Temperature Transmitter, Temperature Gauge, Liquid in Glass Thermometer, Digital Thermometer
Using Temp. indicator with RTD (Pt 100) sensor , Oil bath, 6 ½ Digital Multimeter By Comparison Method
> 50 °C to 170 °C 2.11 °C
53 THERMAL- TEMPERATURE
Thermocouples With or without Controller / Indicator / Data Logger / Recorder, Temperature Transmitter, Temperature Gauge, Digital Thermometer
Using Iindicator with with R Type sensor, Dry Block Furnace, 6 ½ Digital Multimeter By Comparison Method
> 200 °C to 500 °C 3.3 °C
Laboratory Name : QUALITY SOLUTIONS INDUSTRIES PRIVATE LIMITED, PLOT NO: X-4, BPTP, SECTOR-76, FARIDABAD, HARYANA, INDIA
Accreditation Standard ISO/IEC 17025:2017 Certificate Number CC-2717 Page No 62 of 62 Validity 09/07/2024 to 08/07/2026 Last Amended on 01/08/2024
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group
Measurand or Reference Material/Type of instrument or material to be calibrated
or measured / Quantity Measured /Instrument
Calibration or Measurement Method or procedure
Measurement range and additional parameters
where applicable(Range and Frequency)
* Calibration and Measurement
Capability(CMC)(±)
54 THERMAL- TEMPERATURE
Thermocouples With or without Controller / Indicator/ Data Logger / Recorder, Temperature Transmitter, Temperature Gauge
Using Temp. sensor with indicator R type, Dry block furnace, 6 ½ Digital Multimeter By comparison method
> 500 °C to 1200 °C 3.8 °C
* CMCs represent expanded uncertainties expressed at approximately the 95% level of confidence, using a coverage factor of k = 2.
| Nimi | K.p. | Δ | Viit | Tüüp | Org | Osapooled |
|---|---|---|---|---|---|---|
| Vastus pöördumisele | 16.06.2025 | 1 | 12.2-7/177-2 | Väljaminev kiri | ram | Quality Solutions Industries Private Ltd |