Taotlus

Valge 4 / 11413 Tallinn / 620 1200 / [email protected] / www.transpordiamet.ee

Registrikood 70001490

Tõnu Vilipuu

Altos Teed OÜ

[email protected]

Õlleköögi põik 6

75307, Kurna küla,

Harju maakond

Meie 24.07.2025 nr 8-1/25-068/12283-2

Töövõtja projektijuhi kooskõlastamine

Käesolevaga Tellija kooskõlastab „Saare maakonna teekatte kahjustuste parandustööd“

projektijuhiks Tõnu Vilipuu, kes vastab Töövõtja poolt esitatud CV alusel Pindamise

töövõtulepingu nr 3.2-3/25/1036-1, Lepingu lisas 3 – Lepingu eritingimuste punkt 3 ja punkt 3

alampunktides esitatud tingimustele.

Lugupidamisega

(allkirjastatud digitaalselt)

Aivar Valdna

korrashoiu projektijuht

Lääne osakonna korrashoiu ja liikluskorralduse üksus

Aivar Valdna

5116770, [email protected]

EUROPASS CERTIFICATE SUPPLEMENT(*)

Republic of Estonia

(*)Explanatory note This document is designed to provide additional information about the specified certificate and does not have any legal status in itself. The format of the description is based on the following texts: Council Resolution 93/C 49/01 of 3 December 1992 on the transparency of qualifications, Council Resolution 96/C 224/04 of 15 July 1996 on the transparency of vocational training certificates, and Recommendation 2001/613/EC of the European Parliament and of the Council of 10 July 2001 on mobility within the Community for students, persons undergoing training, volunteers, teachers and trainers.

More information available at: http://europass.cedefop.europa.eu/et/home

©European Communities 2002

1. TITLE OF THE CERTIFICATE - ET (1)

Diplomeeritud teedeinsener, EKR tase 7

(1) In the original language

2. TRANSLATED TITLE OF THE CERTIFICATE (1)

Diploma Civil Engineer in Road Engineering, EstQF Level 7

(1) If applicable. This translation has no legal status.

3. PROFILE OF SKILLS AND COMPETENCIES

Civil engineers in road engineering act as specialists in the planning, design, construction, expansion, reconstruction and demolition of highways and streets, railroad embankments¹ and structures connected to roads. A civil engineer in road engineering is tasked with developing technical solutions for road construction and the realisation of project solutions. In performing their professional duties, civil engineers in road engineering give consideration to social, economic, environmental, occupational health, occupational safety and ethical aspects, and work with specialists in related fields where necessary.

Civil engineers in road engineering at EQF Level 7 specialise in one of two areas: 1) Road construction and upkeep 2) Bridge construction² and upkeep

In addition to a specialisation, at least one of the following occupations must be chosen:

For road construction and upkeep: a) Preparing road design documentation b) Preparing traffic management documentation c) Construction activity management (construction) d) Construction management e) Owner supervision f) Road upkeep g) Conducting expert analysis of road design h) Conducting audits of traffic safety i) Project management

For bridge construction² and upkeep: a) Preparing bridge design documentation b) Construction activity management (construction) c) Construction management d) Owner supervision e) Bridge upkeep f) Conducting expert analysis of bridge design projects g) Conducting audits of bridges h) Project management

Diploma Civil Engineer in Road Engineering, Level 7 is a specialist who is responsible for their own performance and that of others in the work group they manage. The occupational qualification of Diploma Civil Engineer in Road Engineering, Level 7 entitles the bearer, on a statutory basis, to act as a competent person independently and at their own risk within the limits described as follows:

I MANAGEMENT OF (construction) ROAD CONSTRUCTION ACTIVITY, CONSTRUCTION MANAGEMENT AND ROAD UPKEEP a) Highways which are expected to see up to 35,000 cars per day (the main route in the case of crossroads); b) Streets which are expected to see up to 70,000 cars per day; c) Road subgrades up to 20 m high or hollow ways up to 20 m deep; d) Pavement repairs at railway crossings; e) Railroad embankments without barriers.

II MANAGEMENT OF BRIDGE² CONSTRUCTION ACTIVITIES (construction), CONSTRUCTION MANAGEMENT AND BRIDGE UPKEEP a) Crossovers with regular construction solutions (bridges, viaducts, gantries, wildlife crossings, etc.): - That have a maximum height of 20 m above the surface of land or water; - That have a single clear opening of a maximum of 100 m; b) Culverts without barriers; c) Tunnels for foot or road traffic with regular construction solutions in the first or second geotechnical category³.

III PREPARING ROAD DESIGN DOCUMENTATION, OWNER SUPERVISION, PREPARING TRAFFIC MANAGEMENT DOCUMENTATION, CONDUCTING EXPERT ANALYSIS OF ROAD DESIGN AND LEADING DESIGN a) Highways which are expected to see up to 35,000 cars per day (the main route in the case of crossroads); b) Streets which are expected to see up to 70,000 cars per day; c) All roads in wet areas; d) Road subgrades up to 20 m high or hollow ways up to 20 m deep, incl. retaining walls; e) Retaining walls up to 3 m high; f) Roads without interchanges; g) Pavement repairs at railway crossings; h) Railroad embankments which can carry rolling stock with axle loads of up to 35 t; i) Railway buildings with regular construction solutions which may have: - sloped railroad subgrades up to 16 m high; - railroad subgrades with retaining walls up to 9 m high; - sloped railroad hollows up to 20 m deep; j) railroad hollows with retaining walls up to 9 m deep; k) Wetlands up to 6 m deep.

IV PREPARING BRIDGE DESIGN DOCUMENTATION², OWNER SUPERVISION AND DESIGN MANAGEMENT a) Crossovers with regular construction solutions (bridges, viaducts, gantries, wildlife crossings, etc.): - that have a maximum height of 12 m above the surface of land or water; - That have a single clear opening of a maximum of 60 m; b) Construction of bridge pillars up to the 2nd wet area; c) Tunnels and culverts up to 15 m wide, 7.5 m below the red line and in the first or second geotechnical category³; d) Retaining walls without barriers; e) Entrance and exit ramps up to 50 m before and after a bridge; f) All railway bridges in accordance with the above-mentioned parameters.

V CONDUCTING EXPERT ANALYSIS OF BRIDGE² DESIGN AND CONDUCTING AUDITS OF BRIDGES a) Bridges, viaducts, gantries, wildlife crossings, etc.: - That have a maximum height of 20 m above the surface of land or water; - That have a single clear opening of a maximum of 60 m; b) Up to the 2nd wet area; c) Tunnels and culverts without barriers; d) All railway bridges in accordance with the above-mentioned parameters.

VI CONDUCTING AUDITS OF TRAFFIC SAFETY Traffic safety auditing on highways that see up to 35,000 cars per day and streets that see up to 70,000 cars per day.

A.2.1 Mandatory competences in the occupation of civil engineer in road engineering 1. Following the requirements of professional ethics 2. Professional self-improvement 3. Teamwork 4. Applying the principles of environmental protection and energy efficiency 5. Applying specialised knowledge to work 6. Digital competence and language skills

Road construction and upkeep A.2.2 Road construction and upkeep 1. Conducting and organising work within the limits of competence provided by the occupational qualification level 2. Verification of the high quality and compliance with traffic safety requirements of completed work and their parts

3. Determining the complex compliance/suitability of completed works 4. Arranging the transfer of completed works to the customer

Bridge construction and upkeep A.2.3 Bridge construction and upkeep 1. Conducting and organising work within the limits of competence provided by the occupational qualification level 2. Quality control of completed works and their parts 3. Determining the complex compliance/suitability of completed works 4. Arranging the transfer of completed works to the customer

A.2.4 Preparing road design documentation 1. Compiling the road design project within the limits of competence provided by the occupational qualification level 2. Collecting and analysing source data 3. Participation in creating plans as an expert 4. Road geometry design 5. Choosing a type of pavement construction or designing pavement construction 6. Drainage system design 7. Traffic management design 8. Preparing and formulating design documentation 9. Collaboration with the design team 10. Construction cost estimation 11. Preparing demolition projects for roads 12. Compiling maintenance and operating instructions 13. Conducting designer’s supervision 14. Conducting expert analysis of road design

A.2.5 Preparation of bridge design documentation 1. Compiling the bridge design project within the limits of competence provided by the occupational qualification level 2. Collecting and analysing source data 3. Participation in creating plans as an expert 4. Choosing, calculating and dimensioning the constructive scheme and type of bridge 5. Design of bridge entrance and exit ramps 6. Determining barrier solutions 7. Preparing and formulating the design documentation for the constructional part 8. Collaboration with the design team 9. Preparing demolition projects for structures 10. Construction cost estimation 11. Compiling maintenance and operating instructions 12. Conducting designer’s supervision 13. Conducting expert analysis of bridge design projects 14. Conducting audits of bridges

A.2.6 Construction management (construction) 1. Management of construction activity within the limits of competence provided by the occupational qualification level 2. Compiling tenders 3. Planning construction activities 4. Planning construction resources 5. Management of subcontractor procurements and entry into contracts 6. Procurement of construction supplies 7. Organisation of construction activity and temporary traffic during construction work 8. Bridge upkeep (according to specialisation) 9. Road upkeep (according to specialisation) 10. Organising quality control and surveying 11. Preparing construction site transfer documentation 12. Arranging the transfer of the construction site

A.2.7 Construction management 1. Construction management within the limits of competence provided by the occupational qualification level 2. Preparing procurements and compiling procurement documentation 3. Compiling a schedule for construction work 4. Construction cost calculation 5. Design work preparation and organisation 6. Construction work preparation 7. Tender documentation preparation 8. Selecting contractors and preparing contracts 9. Coordinating the construction process as a representative of the customer or contractor 10. Transfer of construction site and taking it into use 11. Warranty period procedures

A.2.8 Owner supervision 1. Performing owner supervision within the limits of competence provided by the occupational qualification level 2. Developing a supervision programme

3. Verifying compliance of design project with requirements 4. Verifying compliance of construction work with contract 5. Quality control and assessment 6. Verifying compliance with safety requirements 7. Verifying required documentation 8. Accepting the building 9. Distribution of information 10. Making proposals 11. Conducting expert analysis of the design project within the limits of competence provided by the occupational qualification level and specialisation 12. Conducting audits of bridges (provided they have the relevant specialisation)

A.2.9 Road upkeep 1. Organising a patrol service and road condition monitoring 2. Organising road maintenance in summer and winter 3. Organising maintenance repairs

A.2.10 Bridge upkeep 1. Organising monitoring of the conditions of bridges and their parts 2. Organising maintenance and repair work

A.2.11 Preparing traffic management documentation 1. Analysing source data from traffic research and preparing research 2. Carrying out traffic research 3. Collecting and analysing the source data for the traffic organisation project 4. Preparing traffic management documentation 5. Modelling traffic management

A.2.12 Expert analysis of design project 1. Conducting expert analysis of the design project related to their specialisation within the limits of competence provided by the occupational qualification level 2. Familiarisation with the project, collecting and analysing source data 3. Determining the volumetric accuracy of the design project 4. Determining the compliance of project solutions with their purpose and requirements 5. Compiling an expert analysis report

A.2.13 Conducting audits of bridges 1. Conducting audits of buildings related to their specialisation within the limits of competence provided by the occupational qualification level 2. Familiarisation with the site, collecting and analysing source data 3. Organising additional studies and tests 4. Performing control calculations and additional measurements 5. Compiling an audit report

A.2.14 Conducting audits of traffic safety 1. Conducting audits of traffic safety within the limits of competence provided by the occupational qualification level 2. Familiarisation with the situation, collecting and analysing source data 3. Assessment of impact on traffic safety 4. Traffic safety auditing 5. Determining road safety 6. Road safety verification

A.2.15 Design management 1. Conducting design management activities within the limits of competence provided by the occupational qualification level 2. Preparing the design contract 3. Assembling the design team 4. Organising the exchange of information 5. Design coordination and quality management 6. Arranging designer’s supervision

__________________________ ¹ In this occupational qualification standard, railroad embankments are defined as railway and tramway embankments with their accompanying drainage systems, culverts, slopes, barriers, etc. This term does not include superstructures. ² In this occupational qualification standard, bridges are defined as bridges, viaducts, tunnels, wildlife crossings, gantries and culverts for any type of road (footpaths, bicycle paths, non-motorised transport routes, motorways and railways). ³ as per EVS-NE 1997-1:2006

4. RANGE OF OCCUPATIONS ACCESSIBLE TO THE HOLDER OF THE CERTIFICATE (1)

Designer, person performing owner supervision, construction manager, site manager, consultant, project manager

(1) If applicable

5. OFFICIAL BASIS OF THE CERTIFICATE Name and status of the body awarding the certificate

The occupational certificate that has been issued by the professional council that operates under the activity license issued by a Awarding Body

Name and status of the national/regional authority providing accreditation/recognition of the certificate

Occupational Qualification Council approved by a Regulation of the Government of the Republic

Level of the certificate (national or international)

Estonian Qualification Framework level 7 European Qualification Framework level 7

Grading scale / Pass requirements

passed/fail

Access to next level of education/training

Charetered Civil Engineer in Road Engineering, EstQF Level 8

International agreements

Legal basis

Occupational Qualifications Act (RT I 2008, 24, 156; 01.09.2008)

6. OFFICIALLY RECOGNISED WAYS OF ACQUIRING THE CERTIFICATE

In order to obtain a occupational certificate, the applicant has to prove all his/her competencies required by the occupational standard and by the procedure for awarding of occupational qualification established by the body awarding the occupational qualification

More information (including a description of the national qualifications system) available at: www.kutsekoda.ee

Valge 4 / 11413 Tallinn / 620 1200 / [email protected] / www.transpordiamet.ee

Registrikood 70001490

Altos Teed OÜ

[email protected]

Õlleköögi põik 6

75307, Kurna küla, Rae vald, Harju

maakond

Teie 11.05.2022 e-kiri

Meie 11.05.2022 nr 8-6/22/10530-2

KINNITUSKIRI

Kinnitame, et Altos Teed OÜ, registrikoodiga 12967894, asukohaga Õlleköögi põik 6, 75307 Rae

vald osutas tee-ehituse töövõtulepingu nr 3.2-3/21/1168-1 alusel riigitee 77 Kuressaare-Sääre km

11,226-21,150 Mändjala-Läätsa lõigu rekonstrueerimise ja riigitee 21111 Tehumardi-Kogula km

1,370-7,960 katte ehituse kruusateele ehitustööd .

Töö on teostatud lepingu ja hea tava kohaselt.

Riigihanke nimetus: Riigitee 77 Kuressaare-Sääre km 11,226-21,150 Mändjala-Läätsa lõigu

rekonstrueerimine ja riigitee 21111 Tehumardi-Kogula km 1,370-7,960 katte ehitus kruusateele

Riigihanke viitenumber: 233537

Teenuse osutamise periood: mai -november 2021.a.

Teostatud tööde maksumus: 3 823 112,77 eurot ilma km-ta

Tellijale üle antud tööde maht:

- Teostatud väljakaevetöid ca 23 600 m²; - Ehitatud dreenkihti (h= 20 cm) 26 700 m²; - Ehitatud killustikalust (h= 14-25 cm) 120 000 m²; - Ehitatud kompleksstabiliseeritud alust KS 32 (h014 cm) 77 154 m²; - Ehitatud freesipurust alust (h= 5cm) 17 100 m²; - Teostatud pindamistöid (2,5x) 46 647 m²; - Paigaldatud asfaltbetoonkatendit AC 16 surf 90 310 m²; - Paigaldatud asfaltbetoonkatendit AC 8 surf 4 079 m²; - Paigaldatud asfaltbetoonkatendit AC 20 base 78 547 m²; - Rajatud teepeenraid 13 000 m²; - Paigaldatud äärekive 2 900 m;

- Paigaldatud sillutuskatet 1 275 m²; - Paigaldatud sademevee kanalisatsioonitoru (De 200-400 mm) 882 m;

- Paigaldatud plasttruupe (DN 400-1000 mm) 163 m;

- Paigaldatud teraselementidest kaarsild L=12,27 m;

- Teostatud liikluskorraldustöid summas 123 931 eurot ilma käibemaksuta;

- Teostatud elektri-, side- ja tänavavalgustustöid summas 161 851 eurot ilma käibemaksuta

(sh 14 uut tänavavalgustit ja 32 ümbertõstetud valgustusmasti);

- Rajatud muru kasvualust 87 621 m²; - Paigaldatud bussiootekodasid 6 tk.

2 (2)

Töövõtja projektimeeskond:

- Projektijuht Tõnu Vilipuu;

- Objektijuht Kuldar Aavastik.

Lugupidamisega

(allkirjastatud digitaalselt)

Toomas Magus

ehituse projektijuht

taristu ehitamise ja korrashoiu osakonna lääne üksus

Toomas Magus

5033754 [email protected]

Valge 4 / 11413 Tallinn / 620 1200 / [email protected] / www.transpordiamet.ee

Registrikood 70001490

Altos Teed OÜ

[email protected]

Õlleköögi põik 6

75307, Kurna küla, Rae vald, Harju

maakond

Teie 06.06.2024 e-kiri

Meie 12.06.2024 nr 8-6/24/10002-2

KINNITUSKIRI

Kinnitame, et Altos Teed OÜ, registrikoodiga 12967894, asukohaga Õlleköögi põik 6, 75307 Rae

vald teostas tee-ehituse töövõtulepingu nr 3.2-3/23/1651-1 alusel riigiteede 10 Risti – Virtsu –

Kuivastu – Kuressaare km 109,307-119,073 teekatte taastusremondi ja 21139 Kuressaare –

Marientali km 0,734-1,374 kergliiklustee ehitustööd.

Töö on teostatud lepingu ja hea tava kohaselt.

Riigihanke nimetus: Riigiteede 10 Risti-Virtsu-Kuivastu-Kuressaare km 109,307-119,073

teekatte taastusremont ja 21139 Kuressaare-Marientali km 0,734-1,374 kergliiklustee ehitus

Riigihanke viitenumber: 266227

Teostatud tööde maksumus: 1 419 116,62 eurot ilma km-ta

Teenuse osutamise periood: august – november 2023

Tellijale üle antud tööde maht:

- Ehitatud muldkeha 470 m³;

- Ehitatud dreenkihti: 2 503 m²;

- Ehitatud killustikalust: 2 446 m²;

- Teostatud freesimistöid 10 000 m²;

- Paigaldatud asfaltbetoonkatendit AC 16surf: 95 101 m²;

- Paigaldatud asfaltbetoonkatendit AC 8surf: 1 515 m²;

- Paigaldatud asfaltsegust AC 12bin tasanduskihti: 2 800 tonni;

- Teostatud pindamistöid: (2x) 65 m²;

- Rajatud teepeenraid: 20 030 m²;

- Paigaldatud äärekive 65 m ja betoonist tänavakattekive 12 m²;

- Teostatud sademeveekanalisatsiooni töid summas 115 169 eurot ilma käibemaksuta, sh

paigaldatud drenaažitorustikku 590 m;

- Teostatud liikluskorraldustöid summas 65 727 eurot ilma käibemaksuta;

- Teostatud tänavavalgustustöid summas 32 861 eurot ilma käibemaksuta (sh 7 uut

tänavavalgustit ja 5 ümbertõstetavat valgustusmasti);

- Rajatud muru kasvualust 630 m²

Töövõtja projektimeeskond:

- Projektijuht Tõnu Vilipuu

2 (2)

Lugupidamisega

(allkirjastatud digitaalselt)

Toomas Magus

ehituse projektijuht

Lääne osakonna ehituse üksus

Toomas Magus

5033754 [email protected]

Valge 4 / 11413 Tallinn / 620 1200 / [email protected] / www.transpordiamet.ee

Registrikood 70001490

ALTOS Teed OÜ

Marilin Tappo

Õlleköögi põik 6

Rae vald, Harjumaa

Meie 26.05.2025 nr 8-6/25/8664-2

KINNITUSKIRI

Kinnitame, et Altos Teed OÜ, registrikoodiga 12967894, asukohaga Õlleköögi põik 6, 75307 Rae

vald, teostas tee-ehituse töövõtulepingu nr 3.2-3/24/1089-1 alusel Kuivastu-Pädaste-Liiva km 7,3-

11,7 teelõigul külmakahjude remondi- ja ribapindamistööd.

Töö on teostatud lepingu ja hea tava kohaselt.

Riigihanke nimetus: Kuivastu-Pädaste-Liiva km 7,3-11,7 teelõigul külmakahjude remont ja

ribapindamistööd

Riigihanke viitenumber: 279070

Teenuse osutamise periood: 08.07.2024 - 07.09.2024

Teostatud tööde maksumus: 199 508,09 eurot (ilma km-ta)

Tellijale üle antud tööde maht:

- Paigaldatud asfaltsegust AC 8 bin tasanduskihti 1 558,4 t

- Teostatud ribapindamistöid 29 981 m²

Töövõtja projektimeeskond:

- Projektijuhi abi Tõnu Vilipuu

Lugupidamisega

(allkirjastatud digitaalselt)

Aivar Valdna

korrashoiu projektijuht

Lääne osakonna korrashoiu ja liikluskorralduse üksus

Aivar Valdna

5116770 [email protected]

2 (2)